Series MKFT | Dynamic climate chambers for rapid temperature changes with humidity control and extended low temperature range

The BINDER MKFT series environmental simulation chamber for low temperature alternating climate profiles is the specialist for dynamic alternating climate change between -70 °C and 180 °C. Large performance reserves and rapid cooling make the MKFT environmental simulation chamber the high-end product for complex standards-based climate tests.

Important characteristics

  • Temperature range: -70 °C to 180 °C
  • Humidity range: 10 % to 98 % RH
  • Integrated water-storage tank, 20 liters
  • 4 zero-voltage relay contacts
  • APT.line™ preheating chamber technology
  • Programmable condensation protection for test material
  • Intuitive touchscreen controller with time-segment and real-time programming
  • Internal data logger, measured values can be read out in open format via USB
  • Heated viewing window with LED interior lighting
  • Humidity regulation with capacitative humidity sensor and vapor humidification
  • BINDER APT-COM™ 3 Basic Edition communication software
  • Troubleshooting system with visual and audible alarms
  • Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm
  • Access port with silicone plug (Models 115, 240: 50 mm, left)
  • 2 access ports with silicone plugs (Model 720: 80 mm, left and right)
  • 4 castors, two with brakes
  • Computer interface: Ethernet
  • 230 V power socket on the right-side control panel
  • Adjustable ramp function
  • Integrated chart recorder
  • Real-time clock
  • Door heating
  • Alarm notification in the event of insufficient water in fresh water tank
  • 1 stainless steel rack
  • Complete safety connection kit for water supply and drainage, up to 1 m in height
  • Inner chamber made of stainless steel
  • CFC-free refrigerants R-404A and R-23
  • Cooling with cascade compressor cooling unit
Models
  • Model MKFT 115
  • Housing dimensions not incl. fittings and connections - W x H x D [mm]: 980 x 1725 x 865
  • Internal dimension W x H x D [mm]: 600 x 480 x 400
  • Net weight [kg]: 330
  • Interior volume [L]: 115
  • Bookmark +
  • Model MKFT 240
  • Housing dimensions not incl. fittings and connections - W x H x D [mm]: 1115 x 1940 x 925
  • Internal dimension W x H x D [mm]: 735 x 700 x 443
  • Net weight [kg]: 415
  • Interior volume [L]: 228
  • Bookmark +
  • Model MKFT 720
  • Housing dimensions not incl. fittings and connections - W x H x D [mm]: 1580 x 2005 x 1140
  • Internal dimension W x H x D [mm]: 1200 x 1020 x 600
  • Net weight [kg]: 635
  • Interior volume [L]: 734
  • Bookmark +
Technical data

Please select a model to view technical data:

Services
RRP* [?] Merken
  • Designation:

    Calibration temperature and humidity

  • Description:

    including certificate, one measuring point in center of chamber at 25 °C / 60 % RH or at specified values

  • Art. No.: DL30-0301
- +
  • Designation:

    Execution of IQ/OQ

  • Description:

    in accordance with qualification folder

  • Art. No.: DL42-0300
- +
  • Designation:

    Execution of IQ/OQ/PQ

  • Description:

    in accordance with customer's requirement, price: on request

  • Art. No.: DL44-0500
- +
  • Designation:

    Extension of the warranty from 2 to 3 years

  • Description:

    beginning with the date of delivery, wearing parts are not included

  • Art. No.: DL02-9041
- +
  • Designation:

    Extension of the warranty from 2 to 5 years

  • Description:

    beginning with the date of delivery, wearing parts are not included

  • Art. No.: DL02-9042
- +
  • Designation:

    Installation

  • Description:

    and set up of unit at operating location, connect to existing connections

  • Art. No.: DL10-0300
- +
  • Designation:

    Instruction

  • Description:

    unit function instructions for operation and programming of the controller

  • Art. No.: DL10-0700
- +
  • Designation:

    Preventive maintenance

  • Description:

    Executive of equipment inspection according to maintenance plan

  • Art. No.: DL20-0500
- +
  • Designation:

    Qualification folder IQ/OQ

  • Description:

    supporting documents for validation performed by customer, consisting of: IQ/OQ checklists, unit schematics, QM certificate in accordance with ISO 9001

  • Art. No.: 8012-0866
- +
  • Designation:

    Qualification folder IQ/OQ/PQ

  • Description:

    supporting documents for validation performed by customer, in accordance with customer's requirement, extension of Qualification folder IQ/OQ by chapter PQ

  • Art. No.: 8012-0954
- +
  • Designation:

    Temperature and humidity measurement according to DIN12880

  • Description:

    including certificate (27 temperature measuring points and one humidity measuring point, at 25 °C / 60 % RH or at specified values)

  • Art. No.: DL30-0427
- +
  • Designation:

    Temperature measurement 18 temperature measuring points and 1 humidity measuring point

  • Description:

    including certificate, 18 temperature measuring points and 1 humidity measuring point in center of chamber, at 25 °C / 60 % RH or at specified values

  • Art. No.: DL30-0318
- +
  • Designation:

    Temperature measurement 27 temperature measuring points and 1 humidity measuring point

  • Description:

    including certificate, 27 temperature measuring points and 1 humidity measuring point in center of chamber, at 25 °C / 60 % RH or at specified values

  • Art. No.: DL30-0327
- +
  • Designation:

    Temperature measurement 9 temperature measuring points and 1 humidity measuring point

  • Description:

    including certificate, 9 temperature measuring points and 1 humidity measuring point in center of chamber, at 25 °C / 60 % RH or at specified values

  • Art. No.: DL30-0309
- +
Options and Accessories

Complementary to our products we offer a broad range of options and accessories - from access ports and to racks to documentation and software.

Please select a model to get an overview of all available options and accessories for this product:

Downloads

MKF | MKFT series E4 Model 56 | 115 | 240 | 720

  • Category: Operating Manuals
  • File type / size PDF (11.95 MB)

Dynamic climate chambers MK | MKF | MKT | MKFT series

  • Category: Brochures
  • File type / size PDF (2.05 MB)

Trends in consumer behavior How has the food industry changed in industrialized countries?

  • Category: White paper
  • File type / size PDF (157.03 kB)

Artificial aging Predicting material behavior

  • Category: White paper
  • File type / size PDF (435.64 kB)

BINDER PURE AQUA SERVICE KBF| KBF P | KBF LQC | KMF | KBWF | MKF | MKFT series

  • Category: Options & Accessories
  • File type / size PDF (628.12 kB)

Dynamic climate chambers with dry-air purge MK | MKF | MKT | MKFT series

  • Category: Options & Accessories
  • File type / size PDF (614.49 kB)

Cell and module test chamber for lithium-ion energy storage devices Additional safety measures on the MK 240 dynamic climate chamber

  • Category: Options & Accessories
  • File type / size PDF (330.48 kB)

Data Logger Kits – temperature and humidity Data Logger Kit NET 100 | Data Logger Kit NET 100/60

  • Category: Options & Accessories
  • File type / size PDF (256.74 kB)

Dynamic climate chamber 5 key factors to consider when buying dynamic climate chambers

  • Category: Buyer´s Guide
  • File type / size PDF (3.59 MB)

BINDER environmental simulation chambers with humidity control

BINDER environmental simulation chambers in the MKFT series are designed for rapid temperature changes and also feature an extended low-temperature range and humidity control. They never fail to impress with their speed of cooling down, high precision, and huge power reserves – even during complex climate tests.
The dynamic climate chambers in the MKFT series operate within a particularly wide temperature range of between -70 °C and 180 °C, and a humidity range of between 10% RH and 98% RH. The digital display here works to the accuracy of a tenth of a degree or a tenth of a percent, respectively.
Humidity is regulated using a capacitive humidity sensor and steam humidification. There is programmable condensation protection for samples as well as a heated viewing window featuring LED interior lighting. Four zero-voltage relay contacts can also be activated via the MCS controller.

Environmental simulation chambers with innovative preheating chamber technology

BINDER environmental simulation chambers feature the patented APT.line™ preheating chamber technology, which is an innovative heating system that ensures homogeneous temperature distribution in the climate chamber interior. At the same time, the »Advanced Preheating Technology« provides exceedingly fast recovery times. As with the environmental simulation chambers in the MKFT series, the APT.line™ preheating chamber technology is used in the majority of BINDER's climate chambers, allowing for stable operation over extended periods of time, even when the climate chambers are fully loaded.
BINDER's dynamic climate chambers in the MKFT series, with humidity control and extended low-temperature range, are available in different versions with interior volumes offering varying capacities. They are perfectly suited to material testing under dynamic conditions, being able to cope with complex temperature profiles while also controlling the humidity levels. With BINDER environmental simulation chambers, innovative technology goes hand in hand with excellent usability.