Just register your serial number – and enjoy the benefits.
There for you on-site – all thanks to the global BINDER Service organization.
What's new? Learn more in our news articles.
Simply subscribe and keep up to speed with the BINDER monthly newsletter.
Meet the specialists on simulation chambers. Where? Learn more here.
Do you have any questions or a specific request? Get in touch with us!
Do you have any questions? Here you can find the suitable contact person.
This is how you can find us!
A BINDER material test chamber with mechanical convection of the FP series provides reliably short drying times and particularly fast heating – even for chambers under full loads.
Benefits
Important characteristics
Please select a model to view technical data:
RRP* [?] | Merken | |
---|---|---|
|
- | + |
|
- | + |
|
- | + |
|
- | + |
|
- | + |
|
- | + |
|
- | + |
|
- | + |
|
- | + |
|
- | + |
|
- | + |
|
- | + |
|
- | + |
|
- | + |
|
- | + |
Complementary to our products we offer a broad range of options and accessories - from access ports and to racks to documentation and software.
Please select a model to get an overview of all available options and accessories for this product:
FP series
Drying and heating chambers (FP series) - Drying chambers, constant climate chambers, dynamic climate chambers and cooling incubators test the service life of MinebeaMitsumi spindle motors MinebeaMitsumi Technology Center Europe GmbH
Good Laboratory Practice Your checklist for GLP-compliant research and development
Artificial aging Predicting material behavior
Validation and Qualification In the regulated environment
Drying and heating chambers E | ED | ED-S | FD | FD-S | FED | FP | M series
BINDER Service 100 % performance and availability
BINDER INDIVIDUAL Series production devices for special requirements
Model |
Housing dimensions not incl. fittings and connections W x H x D [mm] |
Internal dimension W x H x D [mm] |
Net weight [kg] |
Interior volume [L] |
Bookmark |
---|---|---|---|---|---|
FP 53 | 635 x 620 x 575 | 400 x 400 x 340 | 44 | 53 | + |
FP 115 | 835 x 705 x 645 | 600 x 480 x 410 | 62 | 115 | + |
FP 240 | 1035 x 825 x 745 | 800 x 600 x 510 | 96 | 240 | + |
FP 400 | 1235 x 1025 x 765 | 1000 x 800 x 510 | 145 | 400 | + |
FP 720 | 1235 x 1530 x 865 | 1000 x 1200 x 610 | 194 | 720 | + |
Please select a model to view technical data:
Designation | Description | Art. No. | RRP* [?] | Bookmark |
---|---|---|---|---|
1-year warranty extension |
The warranty is extended by 1 year from the delivery date, wear parts are excluded |
DL50-0010 | - | + |
BRONZE 3-year maintenance contract |
Maintenance service as contractually agreed, visual inspection of mechanical and electrical components, check of control response, 20% discount on spare parts |
DL20-0710 | - | + |
Calibration certificate, temperature |
Extension of calibration of one (1) additional test temperature specified by the user in the center of the usable space, including certificate |
DL30-0102 | - | + |
Calibration certificate, temperature |
Calibration of one (1) test temperature specified by the user in center of chamber, including certificate |
DL30-0101 | - | + |
Execution of IQ/OQ |
Execution of IQ/OQ in accordance with qualification folder |
DL41-0200 | - | + |
Execution of IQ/OQ/PQ |
Execution of IQ/OQ/PQ in accordance with qualification folder |
DL44-0500 | - | + |
GOLD 3-year maintenance contract |
Maintenance service as contractually agreed, visual inspection of mechanical and electrical components, check of control response, 20% discount on spare parts, testing of all key functions, replacement of wear parts, calibration of one test temperature specified by the user in the center of the usable space, including certificate |
DL20-0910 | - | + |
Maintenance |
One-off maintenance service in accordance with maintenance schedule. Visual inspection of mechanical and electrical components, testing of all key functions. Calibration of a test temperature specified by the user in center of usable space without certificate |
DL20-0200 | - | + |
Measurement of air exchange rate |
including certificate (in accordance with ASTM D5374) |
DL33-0000 | - | + |
SILVER 3-year maintenance contract |
Maintenance service as contractually agreed, visual inspection of mechanical and electrical components, check of control response, 20% discount on spare parts, testing of all key functions, calibration of one test temperature specified by the user in the center of the usable space, without certificate |
DL20-0810 | - | + |
Temperature measurement, 18 measuring points |
Temperature measurement with 18 measuring points with a set value specified by the user, including certificate |
DL30-0118 | - | + |
Temperature measurement, 27 measuring points |
Temperature measurement with 27 measuring points with a set value specified by the user, including certificate |
DL30-0127 | - | + |
Temperature measurement, 9 measuring points |
Temperature measurement with 9 measuring points with a set value specified by the user, including certificate |
DL30-0109 | - | + |
Unit commissioning |
Connect the unit to the customer-side connections (electricity, water, wastewater, gas), basic functions check, brief operating instructions. (excl.: unpacking, setup, controller instructions, programming, installation work) |
DL10-0100 | - | + |
Unit instructions |
Instruction regarding operating principle and basic functions of the unit, operation of the control electronics including programming |
DL10-0500 | - | + |
Complementary to our products we offer a broad range of options and accessories - from access ports and to racks to documentation and software.
Please select a model to get an overview of all available options and accessories for this product:
Category | Title | File type / size | Download |
---|---|---|---|
Operating Manuals |
FP series |
PDF (4.98 MB) | > |
Case Studies |
Drying and heating chambers (FP series) - Drying chambers, constant climate chambers, dynamic climate chambers and cooling incubators test the service life of MinebeaMitsumi spindle motors MinebeaMitsumi Technology Center Europe GmbH |
PDF (479.77 kB) | > |
White paper |
Good Laboratory Practice Your checklist for GLP-compliant research and development |
PDF (808.38 kB) | > |
White paper |
Artificial aging Predicting material behavior |
PDF (435.64 kB) | > |
White paper |
Validation and Qualification In the regulated environment |
PDF (392.80 kB) | > |
Brochures |
Drying and heating chambers E | ED | ED-S | FD | FD-S | FED | FP | M series |
PDF (2.98 MB) | > |
Brochures |
BINDER Service 100 % performance and availability |
PDF (330.01 kB) | > |
Brochures |
BINDER INDIVIDUAL Series production devices for special requirements |
PDF (712.27 kB) | > |
BINDER has a range of heating chambers in different versions, precisely tailored to suit specific requirements and tasks. In its Classic.Line FP series, BINDER has developed extremely complex temperature testing chambers, which also meet high quality standards and offer a broad variety of programming options. The forced convection provides short drying times and fast heating up times, which is a real benefit, especially when chambers are fully loaded.
BINDER heating chambers with forced convection and program functions in the FP series are powerful and extremely accurate. They can be operated within a temperature range of between 5 °C and 300 °C. Heating chambers in the FP series boast almost unlimited adjustment opportunities, with the option to program temperature cycles, the fan speed setting for each program interval, the weekly program timer, and the real-time clock of the controller.
Homogeneous temperature distribution is guaranteed in the usable space thanks to the patented APT.line™ preheating chamber technology. The heating chamber's fan helps maintain the temperature accuracy here. Sample conditions are consistent across the entire usable space, regardless of the amount or size of the sample.
Alongside their high performance and efficiency, and varied programming options, BINDER's heating chambers with forced convection are also incredibly user-friendly. All of the unit's functions are clearly arranged and the settings for them can be adjusted with ease. Cleaning is no hassle at all thanks to the stainless steel finish of the interior, the preheating chamber, and the inner sides of the doors, while a serial interface (RS 422) allows the FP series heating chambers to communicate with computers.
Ideal for a wide range of industry, research, and quality assurance applications, BINDER temperature testing chambers can meet even the most exacting of demands.