Series KBF | Constant climate chambers with large temperature / humidity range

The BINDER KBF is the specialist for unconditionally reliable stability testing and precise maintenance of constant climate conditions. From programming to documentation, this constant climate chamber meets all critical requirements.

Request Series KBF > Maintenance contract >

Benefits

  • Safe thanks to climatic homogeneity that far exceeds the accuracy required by ICH guidelines, even with a fully loaded unit.
  • Reliable thanks to failsafe operation without compromise. The interior and Longlife evaporator plate are made entirely from stainless steel.
  • Smart, as a wide range of accessories makes it highly compatible for adaptation to specific customer requirements.
  • Economical thanks to maximum effective volume which allows for 30% larger load compared to the competition.

Important characteristics

  • Temperature range: 0 °C to +70 °C
  • Humidity range: 10 % to 80 % RH
  • APT.line™ preheating chamber technology
  • Humidity regulation with capacitive humidity sensor and vapor humidification
  • Intuitive touchscreen controller with time-segment and real-time programming
  • BINDER Multi Management Software APT-COM™ Basic Edition
  • Internal data logger, measured values can be read out in open format via USB
  • Unit self-test for comprehensive status analysis
  • Tight-sealing inner door made of safety glass (ESG)
  • Avoidance of glass corrosion by special TIMELESS coating
  • Inner chamber made of stainless steel
  • 2 stainless steel racks
  • Access port with silicone plug, 30 mm, left
  • 4 stable castors, two with brakes, from 240 liters
  • Class 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarm
  • Computer interface: Ethernet
  • Door heating
Models
  • Model KBF 115
  • Housing dimensions not incl. fittings and connections - W x H x D [mm]: 880 x 1050 x 650
  • Internal dimension W x H x D [mm]: 600 x 483 x 351
  • Net weight [kg]: 128
  • Interior volume [L]: 102
  • Bookmark +
  • Model KBF 240
  • Housing dimensions not incl. fittings and connections - W x H x D [mm]: 925 x 1460 x 800
  • Internal dimension W x H x D [mm]: 650 x 785 x 485
  • Net weight [kg]: 189
  • Interior volume [L]: 247
  • Bookmark +
  • Model KBF 720
  • Housing dimensions not incl. fittings and connections - W x H x D [mm]: 1250 x 1925 x 890
  • Internal dimension W x H x D [mm]: 973 x 1250 x 576
  • Net weight [kg]: 312
  • Interior volume [L]: 700
  • Bookmark +
  • Model KBF 1020
  • Housing dimensions not incl. fittings and connections - W x H x D [mm]: 1250 x 1925 x 1145
  • Internal dimension W x H x D [mm]: 973 x 1250 x 836
  • Net weight [kg]: 379
  • Interior volume [L]: 1020
  • Bookmark +
Technical data

Please select a model to view technical data:

Services
RRP* [?] Merken
  • Designation:

    1-year warranty extension

  • Description:

    The warranty is extended by 1 year from the delivery date, wear parts are excluded

  • Art. No.: DL50-0030
 - +
  • Designation:

    BRONZE 3-year maintenance contract

  • Description:

    Maintenance service as contractually agreed, visual inspection of mechanical and electrical components, check of control response, 20% discount on spare parts

  • Art. No.: DL20-0710
 - +
  • Designation:

    Execution of IQ/OQ

  • Description:

    Execution of IQ/OQ in accordance with qualification folder

  • Art. No.: DL42-0300
 - +
  • Designation:

    Execution of IQ/OQ/PQ

  • Description:

    Execution of IQ/OQ/PQ in accordance with qualification folder

  • Art. No.: DL44-0500
 - +
  • Designation:

    GOLD 3-year maintenance contract

  • Description:

    Maintenance service as contractually agreed, visual inspection of mechanical and electrical components, check of control response, 20% discount on spare parts, testing of all key functions, replacement of wear parts, calibration of one temperature/humidity value, including certificate

  • Art. No.: DL20-0920
 - +
  • Designation:

    Maintenance

  • Description:

    One-off maintenance service in accordance with maintenance schedule. Visual inspection of mechanical and electrical components, testing of all key functions. Calibration of a test temperature specified by the user in center of usable space without certificate

  • Art. No.: DL20-0400
 - +
  • Designation:

    SILVER 3-year maintenance contract

  • Description:

    Maintenance service as contractually agreed, visual inspection of mechanical and electrical components, check of control response, 20% discount on spare parts, testing of all key functions, calibration of one test temperature specified by the user in the center of the usable space, without certificate

  • Art. No.: DL20-0820
 - +
  • Designation:

    Temperature and humidity calibration

  • Description:

    Expansion –Temperature and humidity calibration with 1 measuring point in center of chamber with 1 specified pair of values, including certificate

  • Art. No.: DL30-0302
 - +
  • Designation:

    Temperature and humidity calibration

  • Description:

    Temperature and humidity calibration with 1 measuring point in center of chamber with 1 specified pair of values, including certificate

  • Art. No.: DL30-0301
 - +
  • Designation:

    Temperature and humidity measurement according to DIN12880

  • Description:

    Temperature measurement in accordance with DIN 12880 with 27 temperature measuring points and 1 humidity measuring point in center of chamber with a pair of values specified by the user, including certificate

  • Art. No.: DL30-0427
 - +
  • Designation:

    Temperature and humidity measurement, 18-1 measuring points

  • Description:

    Temperature measurement with 18 temperature measuring points and 1 humidity measuring point in center of chamber with a pair of values specified by the user, including certificate

  • Art. No.: DL30-0318
 - +
  • Designation:

    Temperature and humidity measurement, 27-1 measuring points

  • Description:

    Temperature measurement with 27 temperature measuring points and 1 humidity measuring point in center of chamber with a pair of values specified by the user, including certificate

  • Art. No.: DL30-0327
 - +
  • Designation:

    Temperature and humidity measurement, 9-1 measuring points

  • Description:

    Temperature measurement with 9 temperature measuring points and 1 humidity measuring point in center of chamber with a pair of values specified by the user, including certificate

  • Art. No.: DL30-0309
 - +
  • Designation:

    Unit commissioning

  • Description:

    Connect the unit to the customer-side connections (electricity, water, wastewater, gas), basic functions check, brief operating instructions. (excl.: unpacking, setup, controller instructions, programming, installation work)

  • Art. No.: DL10-0300
 - +
  • Designation:

    Unit instructions

  • Description:

    Instruction regarding operating principle and basic functions of the unit, operation of the control electronics including programming

  • Art. No.: DL10-0700
 - +
Options and Accessories

Complementary to our products we offer a broad range of options and accessories - from access ports and to racks to documentation and software.

Please select a model to get an overview of all available options and accessories for this product:

Downloads

KBF | KMF series

  • Category: Operating Manuals
  • File type / size PDF (9.73 MB) > 

Constant climate chambers (KBF series) - Putting labels through their paces in BINDER chambers Schreiner Group GmbH & Co. KG

  • Category: Case Studies
  • File type / size PDF (189.40 kB) > 

Constant climate chambers (KBF series) - Test the service life of surgical instruments Aesculap AG

  • Category: Case Studies
  • File type / size PDF (187.78 kB) > 

Constant climate chambers (KBF LQC series) - Top-quality dairy products Arla Foods Deutschland GmbH

  • Category: Case Studies
  • File type / size PDF (802.53 kB) > 

Constant climate chambers (KBF series) - Quality testing made quick and easy B | Braun Aesculap AG

  • Category: Case Studies
  • File type / size PDF (144.08 kB) > 

Constant climate chambers (KBF series) - Desiccants – the all-round talent against corrosion damage TROPACK Packmittel GmbH

  • Category: Case Studies
  • File type / size PDF (1.64 MB) > 

"Good laboratory practice" What is behind all this?

  • Category: White paper
  • File type / size PDF (246.32 kB) > 

Trends in consumer behavior How has the food industry changed in industrialized countries?

  • Category: White paper
  • File type / size PDF (157.03 kB) > 

Accelerated Shelf-life Testing Of Natural Colours in Model Food Systems

  • Category: White paper
  • File type / size PDF (765.50 kB) > 

Validation and Qualification In the regulated environment

  • Category: White paper
  • File type / size PDF (392.80 kB) > 

PURE AQUA SERVICE Serie KBF| KBF P | KBF LQC | KMF | KBWF | MKF | MKFT

  • Category: Options & Accessories
  • File type / size PDF (335.95 kB) > 

Water supply systems Constant climate chambers

  • Category: Options & Accessories
  • File type / size PDF (137.25 kB) > 

LED light bar sets Series KB | KT | KBF

  • Category: Options & Accessories
  • File type / size PDF (291.69 kB) > 

Constant climate chambers KBF| KBF P | KBF LQC | KMF | KBF-S series

  • Category: Brochures
  • File type / size PDF (2.64 MB) > 

BINDER INDIVIDUAL Series production devices for special requirements

  • Category: Brochures
  • File type / size PDF (712.27 kB) > 

Constant climate chambers KBF 6 points to consider when purchasing a constant climate chamber in the pharmaceutical industry

  • Category: Buyer´s Guide
  • File type / size PDF (552.06 kB) > 
< back to Constant climate chambers
Request Series KBF >

Constant climate chambers with a large temperature and humidity range

BINDER Constant climate chambers are suitable for a wide range of applications. Ideal for meeting various requirements and completing different tasks, the chambers can often be used as a cost-effective alternative to environmental chambers. In its KBF series, BINDER has developed Constant climate chambers with a large temperature and humidity range, which maintain the climate conditions set with accuracy. These climate chambers have been designed specifically to perform reliable stability tests.
The Constant climate chambers in the KBF series operate within a temperature range of between 0 °C and 70 °C, and a humidity range of between 10% RH and 80% RH. The proven APT.line™ preheating chamber technology ensures that air is circulated evenly and gently within the usable space, creating the precise and homogeneous climate conditions you need, even when the climate chambers are fully loaded. Humidity is also regulated with precision thanks to the capacitive humidity sensor and steam humidification. After the door has been opened, recovery times are speedy, and the humidity level can be finely adjusted to suit your requirements perfectly.

KBF Constant climate chambers from BINDER for a wide range of applications

KBF Constant climate chambers from BINDER feature an automated water and waste water management system. Equipped with an intuitive touchscreen controller featuring interval and real-time programming, these climate chambers can be used with ease and adjusted with precision. The modular design and stainless steel coating of the inner chamber make sure cleaning is no hassle at all, adding another highlight to the long list of benefits afforded by the KBF Constant climate chambers. With an extensive offering of additional features, they can even be adapted to suit the individual customer.