Series MKFT | Dynamic climate chambers for rapid temperature changes with humidity control and extended low temperature range

The BINDER MKFT series environmental simulation chamber for low temperature alternating climate profiles is the specialist for dynamic alternating climate change between -70 °C and 180 °C. Large performance reserves and rapid cooling make the MKFT environmental simulation chamber the high-end product for complex standards-based climate tests.

Request a Quote > Maintenance contract >

Benefits

  • Homogeneous climate conditions thanks to APT.line™ technology
  • Automatic water and wastewater management
  • Pressure humidification with fast response times
  • Comprehensive programming and data acquisition
  • Large heated viewing window

Important characteristics

  • Temperature range: -70 °C to +180 °C
  • Humidity range: 10 % to 98 % RH
  • Integrated water-storage tank, 20 liters
  • 4 zero-voltage relay contacts
  • APT.line™ preheating chamber technology
  • Programmable condensation protection for test material
  • Intuitive touchscreen controller with time-segment and real-time programming
  • Internal data logger, measured values can be read out in open format via USB
  • Heated viewing window with LED interior lighting
  • Humidity regulation with capacitative humidity sensor and vapor humidification
  • BINDER Multi Management Software APT-COM™ Basic Edition
  • Troubleshooting system with visual and audible alarms
  • Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm
  • Access port with silicone plug (Models 115, 240: 50 mm, left)
  • 2 access ports with silicone plugs (Model 720: 80 mm, left and right)
  • 4 castors, two with brakes
  • Computer interface: Ethernet
  • Adjustable ramp function
  • Integrated chart recorder
  • Real-time clock
  • Door heating
  • Alarm notification in the event of insufficient water in fresh water tank
  • 1 stainless steel rack
  • Complete safety connection kit for water supply and drainage, up to 1 m in height
  • Inner chamber made of stainless steel
  • CFC-free refrigerants R-452A and R-23
  • Cooling with cascade compressor cooling unit
Models
  • Model MKFT 115
  • Housing dimensions not incl. fittings and connections - W x H x D [in]: 38.61 x 68 x 34.08
  • Internal dimension W x H x D [in]: 23.64 x 18.91 x 15.76
  • Net weight [lbs]: 1089
  • Interior volume [cu.ft.]: 4.1
  • Bookmark +
  • Model MKFT 240
  • Housing dimensions not incl. fittings and connections - W x H x D [in]: 43.9 x 76.4 x 36.45
  • Internal dimension W x H x D [in]: 28.96 x 27.58 x 17.45
  • Net weight [lbs]: 1276
  • Interior volume [cu.ft.]: 8
  • Bookmark +
  • Model MKFT 720
  • Housing dimensions not incl. fittings and connections - W x H x D [in]: 62.3 x 79 x 44.9
  • Internal dimension W x H x D [in]: 47.3 x 40.2 x 23.64
  • Net weight [lbs]: 1955
  • Interior volume [cu.ft.]: 25.9
  • Bookmark +
Technical data

Please select a model to view technical data:

Services
Merken
  • Designation:

    BRONZE 3-year maintenance contract

  • Description:

    Maintenance service as contractually agreed, visual inspection of mechanical and electrical components, check of control response, 20% discount on spare parts

  • Art. No.: DL20-0710
 +
  • Designation:

    Execution of IQ/OQ

  • Description:

    Execution of IQ/OQ in accordance with qualification folder

  • Art. No.: DL42-0300
 +
  • Designation:

    Execution of IQ/OQ/PQ

  • Description:

    Execution of IQ/OQ/PQ in accordance with qualification folder

  • Art. No.: DL44-0500
 +
  • Designation:

    GOLD 3-year maintenance contract

  • Description:

    Maintenance service as contractually agreed, visual inspection of mechanical and electrical components, check of control response, 20% discount on spare parts, testing of all key functions, replacement of wear parts, calibration of one temperature/humidity value, including certificate

  • Art. No.: DL20-0920
 +
  • Designation:

    GOLD 3-year maintenance contract

  • Description:

    Maintenance service as contractually agreed, visual inspection of mechanical and electrical components, check of control response, 20% discount on spare parts, testing of all key functions, replacement of wear parts, calibration of one temperature and CO₂ value, including certificate

  • Art. No.: DL20-0940
 +
  • Designation:

    Leakage test

  • Description:

    One-off maintenance service in accordance with maintenance schedule. Visual inspection of mechanical and electrical components, testing of all key functions. Calibration of a test temperature specified by the user in center of usable space without certificate

  • Art. No.: DL00-0034
 +
  • Designation:

    Maintenance

  • Description:

    One-off maintenance service in accordance with maintenance schedule. Visual inspection of mechanical and electrical components, testing of all key functions. Calibration of a test temperature specified by the user in center of usable space without certificate

  • Art. No.: DL20-0500
 +
  • Designation:

    SILVER 3-year maintenance contract

  • Description:

    Maintenance service as contractually agreed, visual inspection of mechanical and electrical components, check of control response, 20% discount on spare parts, testing of all key functions, calibration of one test temperature specified by the user in the center of the usable space, without certificate

  • Art. No.: DL20-0830
 +
  • Designation:

    Temperature and humidity calibration

  • Description:

    Expansion –Temperature and humidity calibration with 1 measuring point in center of chamber with 1 specified pair of values, including certificate

  • Art. No.: DL30-0302
 +
  • Designation:

    Temperature and humidity calibration

  • Description:

    Temperature and humidity calibration with 1 measuring point in center of chamber with 1 specified pair of values, including certificate

  • Art. No.: DL30-0301
 +
  • Designation:

    Temperature and humidity measurement according to DIN12880

  • Description:

    Temperature measurement in accordance with DIN 12880 with 27 temperature measuring points and 1 humidity measuring point in center of chamber with a pair of values specified by the user, including certificate

  • Art. No.: DL30-0427
 +
  • Designation:

    Temperature measurement, 18 temperature measuring points and 1 humidity measuring point

  • Description:

    Temperature measurement with 18 temperature measuring points and 1 humidity measuring point in center of chamber with a pair of values specified by the user, including certificate

  • Art. No.: DL30-0318
 +
  • Designation:

    Temperature measurement, 27 temperature measuring points and 1 humidity measuring point

  • Description:

    Temperature measurement with 27 temperature measuring points and 1 humidity measuring point in center of chamber with a pair of values specified by the user, including certificate

  • Art. No.: DL30-0327
 +
  • Designation:

    Temperature measurement, 9 temperature measuring points and 1 humidity measuring point

  • Description:

    Temperature measurement with 9 temperature measuring points and 1 humidity measuring point in center of chamber with a pair of values specified by the user, including certificate

  • Art. No.: DL30-0309
 +
  • Designation:

    Unit installation

  • Description:

    Connect the unit to the customer-side connections (electricity, water, wastewater, gas), basic functions check, brief operating instructions. (excl.: unpacking, setup, controller instructions, programming, installation work)

  • Art. No.: DL10-0300
 +
  • Designation:

    Unit instructions

  • Description:

    Instruction regarding operating principle and basic functions of the unit, operation of the control electronics including programming

  • Art. No.: DL10-0700
 +
  • Designation:

    Warranty extension from 2 to 3 years

  • Description:

    The warranty is extended by 1 year from the delivery date, wear parts are excluded

  • Art. No.: DL50-0040
 +
Options and Accessories

Complementary to our products we offer a broad range of options and accessories - from access ports and to racks to documentation and software.

Please select a model to get an overview of all available options and accessories for this product:

Downloads

MKF | MKFT series

  • Category: Operating Manuals
  • File type / size PDF (11.80 MB) > 

Dynamic climate chamber (MKFT series) - Cultivating robust grain species The Federal Research Center “Kazan Scientific Center of the Academy of Sciences”

  • Category: Case Studies
  • File type / size PDF (129.23 kB) > 

Drying and heating chambers (FP series) - Drying chambers, constant climate chambers, dynamic climate chambers and cooling incubators test the service life of MinebeaMitsumi spindle motors MinebeaMitsumi Technology Center Europe GmbH

  • Category: Case Studies
  • File type / size PDF (479.77 kB) > 

Trends in consumer behavior How has the food industry changed in industrialized countries?

  • Category: White paper
  • File type / size PDF (157.03 kB) > 

Artificial aging Predicting material behavior

  • Category: White paper
  • File type / size PDF (435.64 kB) > 

Validation and Qualification In the regulated environment

  • Category: White paper
  • File type / size PDF (393.27 kB) > 

PURE AQUA SERVICE Serie KBF| KBF P | KBF LQC | KMF | KBWF | MKF | MKFT

  • Category: Options & Accessories
  • File type / size PDF (335.95 kB) > 

Battery test chambers with package A and package P for testing lithium-ion energy storage devices PACKAGE A | PACKAGE P

  • Category: Brochures
  • File type / size PDF (256.93 kB) > 

Dynamic climate chambers MK | MKF | MKT | MKFT series

  • Category: Brochures
  • File type / size PDF (2.30 MB) > 

BINDER INDIVIDUAL Series production devices for special requirements

  • Category: Brochures
  • File type / size PDF (713.75 kB) > 
< back to Dynamic climate chambers
Request a Quote >

BINDER environmental simulation chambers with humidity control

BINDER environmental simulation chambers in the MKFT series are designed for rapid temperature changes and also feature an extended low-temperature range and humidity control. They never fail to impress with their speed of cooling down, high precision, and huge power reserves – even during complex climate tests.
The dynamic climate chambers in the MKFT series operate within a particularly wide temperature range of between -70 °C and 180 °C, and a humidity range of between 10% RH and 98% RH. The digital display here works to the accuracy of a tenth of a degree or a tenth of a percent, respectively.
Humidity is regulated using a capacitive humidity sensor and steam humidification. There is programmable condensation protection for samples as well as a heated viewing window featuring LED interior lighting. Four zero-voltage relay contacts can also be activated via the MCS controller.

Environmental simulation chambers with innovative preheating chamber technology

BINDER environmental simulation chambers feature the patented APT.line™ preheating chamber technology, which is an innovative heating system that ensures homogeneous temperature distribution in the climate chamber interior. At the same time, the »Advanced Preheating Technology« provides exceedingly fast recovery times. As with the environmental simulation chambers in the MKFT series, the APT.line™ preheating chamber technology is used in the majority of BINDER's climate chambers, allowing for stable operation over extended periods of time, even when the climate chambers are fully loaded.
BINDER's dynamic climate chambers in the MKFT series, with humidity control and extended low-temperature range, are available in different versions with interior volumes offering varying capacities. They are perfectly suited to material testing under dynamic conditions, being able to cope with complex temperature profiles while also controlling the humidity levels. With BINDER environmental simulation chambers, innovative technology goes hand in hand with excellent usability.