Series KMF | Humidity test chambers with expanded temperature / humidity range

The BINDER KMF ensures absolutely constant test conditions throughout the testing area. A big advantage of this humidity test chamber is its low space requirement and flexibility in terms of water supply. The wide temperature and humidity range make this humidity test chamber ideally suited for stress testing series.

Request a Quote > Maintenance contract >

Benefits

  • Safe thanks to climatic homogeneity that far exceeds the accuracy required by ICH guidelines as well as THB (85/85), even with a fully loaded unit.
  • Reliable thanks to failsafe operation without compromise. The interior and Longlife evaporator plate are made entirely from stainless steel.
  • Smart, as a wide range of accessories makes it highly compatible for adaptation to specific customer requirements.
  • Economical thanks to maximum effective volume which allows for 30% larger load compared to the competition.

Important characteristics

  • Temperature range: -10 °C to +100 °C
  • Humidity range: 10 % RH to 98 % RH
  • APT.line™ preheating chamber technology
  • Humidity regulation with capacitive humidity sensor and vapor humidification
  • Inner chamber made of stainless steel
  • BINDER Multi Management Software APT-COM™ Basic Edition
  • Intuitive touchscreen controller with time-segment and real-time programming
  • Internal data logger, measured values can be read out in open format via USB
  • Unit self-test for comprehensive status analysis
  • Tight-sealing inner door made of safety glass (ESG)
  • Avoidance of glass corrosion by special TIMELESS coating
  • 1 stainless steel rack
  • Access port with silicone plug, 30 mm, left
  • Class 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarm
  • Computer interface: Ethernet
  • Door heating
Models
  • Model KMF 115
  • Housing dimensions not incl. fittings and connections - W x H x D [in]: 34.67 x 41.4 x 25.61
  • Internal dimension W x H x D [in]: 23.64 x 19.03 x 13.83
  • Net weight [lbs]: 282
  • Interior volume [cu.ft.]: 3.6
  • Bookmark +
  • Model KMF 240
  • Housing dimensions not incl. fittings and connections - W x H x D [in]: 36.64 x 57.7 x 31.52
  • Internal dimension W x H x D [in]: 25.61 x 30.93 x 19.11
  • Net weight [lbs]: 417
  • Interior volume [cu.ft.]: 8.7
  • Bookmark +
  • Model KMF 720
  • Housing dimensions not incl. fittings and connections - W x H x D [in]: 49.3 x 75.8 x 35.07
  • Internal dimension W x H x D [in]: 38.34 x 49.3 x 22.69
  • Net weight [lbs]: 675
  • Interior volume [cu.ft.]: 24.7
  • Bookmark +
Technical data

Please select a model to view technical data:

Services
Merken
  • Designation:

    BRONZE 3-year maintenance contract

  • Description:

    Maintenance service as contractually agreed, visual inspection of mechanical and electrical components, check of control response, 20% discount on spare parts

  • Art. No.: DL20-0710
 +
  • Designation:

    Execution of IQ/OQ

  • Description:

    Execution of IQ/OQ in accordance with qualification folder

  • Art. No.: DL42-0300
 +
  • Designation:

    Execution of IQ/OQ/PQ

  • Description:

    Execution of IQ/OQ/PQ in accordance with qualification folder

  • Art. No.: DL44-0500
 +
  • Designation:

    GOLD 3-year maintenance contract

  • Description:

    Maintenance service as contractually agreed, visual inspection of mechanical and electrical components, check of control response, 20% discount on spare parts, testing of all key functions, replacement of wear parts, calibration of one temperature/humidity value, including certificate

  • Art. No.: DL20-0920
 +
  • Designation:

    Maintenance

  • Description:

    One-off maintenance service in accordance with maintenance schedule. Visual inspection of mechanical and electrical components, testing of all key functions. Calibration of a test temperature specified by the user in center of usable space without certificate

  • Art. No.: DL20-0400
 +
  • Designation:

    SILVER 3-year maintenance contract

  • Description:

    Maintenance service as contractually agreed, visual inspection of mechanical and electrical components, check of control response, 20% discount on spare parts, testing of all key functions, calibration of one test temperature specified by the user in the center of the usable space, without certificate

  • Art. No.: DL20-0820
 +
  • Designation:

    Temperature and humidity calibration

  • Description:

    Temperature and humidity calibration with 1 measuring point in center of chamber with 1 specified pair of values, including certificate

  • Art. No.: DL30-0301
 +
  • Designation:

    Temperature and humidity calibration

  • Description:

    Expansion –Temperature and humidity calibration with 1 measuring point in center of chamber with 1 specified pair of values, including certificate

  • Art. No.: DL30-0302
 +
  • Designation:

    Temperature and humidity measurement according to DIN12880

  • Description:

    Temperature measurement in accordance with DIN 12880 with 27 temperature measuring points and 1 humidity measuring point in center of chamber with a pair of values specified by the user, including certificate

  • Art. No.: DL30-0427
 +
  • Designation:

    Temperature measurement, 15 measuring points

  • Description:

    Temperature measurement with 15 measuring points with a set value specified by the user, including certificate

  • Art. No.: DL30-0218
 +
  • Designation:

    Temperature measurement, 18 temperature measuring points and 1 humidity measuring point

  • Description:

    Temperature measurement with 18 temperature measuring points and 1 humidity measuring point in center of chamber with a pair of values specified by the user, including certificate

  • Art. No.: DL30-0318
 +
  • Designation:

    Temperature measurement, 27 temperature measuring points and 1 humidity measuring point

  • Description:

    Temperature measurement with 27 temperature measuring points and 1 humidity measuring point in center of chamber with a pair of values specified by the user, including certificate

  • Art. No.: DL30-0327
 +
  • Designation:

    Temperature measurement, 9 temperature measuring points and 1 humidity measuring point

  • Description:

    Temperature measurement with 9 temperature measuring points and 1 humidity measuring point in center of chamber with a pair of values specified by the user, including certificate

  • Art. No.: DL30-0309
 +
  • Designation:

    Unit installation

  • Description:

    Connect the unit to the customer-side connections (electricity, water, wastewater, gas), basic functions check, brief operating instructions. (excl.: unpacking, setup, controller instructions, programming, installation work)

  • Art. No.: DL10-0300
 +
  • Designation:

    Unit instructions

  • Description:

    Instruction regarding operating principle and basic functions of the unit, operation of the control electronics including programming

  • Art. No.: DL10-0700
 +
  • Designation:

    Warranty extension from 2 to 3 years

  • Description:

    The warranty is extended by 1 year from the delivery date, wear parts are excluded

  • Art. No.: DL50-0030
 +
Options and Accessories

Complementary to our products we offer a broad range of options and accessories - from access ports and to racks to documentation and software.

Please select a model to get an overview of all available options and accessories for this product:

Downloads

KBF | KMF series

  • Category: Operating Manuals
  • File type / size PDF (10.10 MB) > 

Constant climate chambers (KMF series) - Young researcher demonstrates the fascinating interaction of powder with ambient humidity Fraunhofer Research Institution for Casting

  • Category: Case Studies
  • File type / size PDF (188.50 kB) > 

"Good laboratory practice" What is behind all this?

  • Category: White paper
  • File type / size PDF (246.52 kB) > 

Trends in consumer behavior How has the food industry changed in industrialized countries?

  • Category: White paper
  • File type / size PDF (157.03 kB) > 

Artificial aging Predicting material behavior

  • Category: White paper
  • File type / size PDF (435.64 kB) > 

Validation and Qualification In the regulated environment

  • Category: White paper
  • File type / size PDF (393.27 kB) > 

PURE AQUA SERVICE Serie KBF| KBF P | KBF LQC | KMF | KBWF | MKF | MKFT

  • Category: Options & Accessories
  • File type / size PDF (335.95 kB) > 

Water supply systems Constant climate chambers

  • Category: Options & Accessories
  • File type / size PDF (137.25 kB) > 

Humidity test chambers KBF | KBF-S | KBF P | KBF LQC | KMF series

  • Category: Brochures
  • File type / size PDF (1.71 MB) > 

BINDER INDIVIDUAL Series production devices for special requirements

  • Category: Brochures
  • File type / size PDF (713.75 kB) > 
< back to Humidity test chambers
Request a Quote >

Humidity test chambers with expanded temperature / humidity range
BINDER Humidity test chambers in the KMF series are ideal when performing stability and durability testing for industrial products. They are also an excellent choice for sample conditioning for material testing on paper, plastics, building materials, textiles, and other materials. The KMF series Humidity test chambers can be used to simulate constant climate conditions even over extended periods and their expanded temperature and humidity range makes them perfectly suited to performing stress test series. Among the other many advantages of these chambers are their low space requirement and their flexibility regarding the water supply.

BINDER Humidity test chambers for innovation and high levels of precision
KMF Humidity test chambers from BINDER feature an extremely wide temperature and humidity range, operating between -10 °C and 100 °C, and 10% RH and 98% RH. Humidity is regulated using a capacitive humidity sensor and steam humidification.
Test conditions are constant across the entire testing area, while the proven APT.line™ preheating chamber technology ensures perfect temperature accuracy in terms of space and time. Air flow is direct and streamlined in the interior, with a fan being used to reach and maintain the set temperatures.
As with all BINDER climate chambers, the units in the KMF series are incredibly user-friendly. What's more, they are even easy to clean due primarily to the full stainless steel finish of the inner chamber.
Suitable for a wide range of applications within industry, science, and research, BINDER Humidity test chambers are extremely accurate. The KMF series units with expanded temperature / humidity range are available in different sizes and even meet the high standards for mandatory stability and durability testing on industrial products.