Model CB-S 260

right

back

left

for temperature and CO₂ values (outputs not adjustable)

the base equipped with casters is used for the secure positioning and leveling of a BINDER CO₂ incubator

for temperature; for extending the measurement in center of chamber to include another test temperature

temperature measurement incl. certificate, 9 measuring points at specified temperature

temperature measurement incl. certificate, 15- 18 measuring points at specified temperature

temperature measurement incl. certificate and 27 measuring points at specified temperature

for temperature, measurement in center of chamber at specified temperature

for temperature and CO₂, temperature measurement in center of chamber, CO₂ measurement performed using test gas at 37 °C and 5 % CO₂

for equipment maintenance and disinfection, consisting of pH-neutral detergent (1000 g, concentrate), spray disinfectant (500 ml, ready-to-use solution), lint-free cleansing tissues, protective gloves, and protective glasses

Unit door and standard glass inner door with door hinged on the left

lockable door handle

for N₂, consisting of a gas tank pressure regulator with connection parts and 5-meter hose

for CO₂, consisting of a gas tank pressure regulator with connection parts and 5-meter hose

for O₂, consisting of a gas tank pressure regulator with connection parts and 5-meter hose

external, BINDER Gas Supply Service, for connecting 2 gas tanks (CO₂, N₂ or O₂), with audible and visual alarms, as well as zero-voltage alarm output

The kit contains a client bridge that establishes a wireless connection between BINDER units and APT-COM4, LIMS, or customer-specific software via an Ethernet interface. It provides an alternative solution in situations where units need to be positioned in locations without an on-site Ethernet connection. In secured networks, installation and configuration must be performed by the customer’s IT service.

concentrated, for gentle remove of residual contaminants; 1 kg

IQ/OQ/PQ documents – supporting documents for validation performed by customers, according to customer requirements, PQ section added to qualification folder IQ/OQ; parameters: temperature, CO₂, O₂ – or pressure, depending on unit

IQ/OQ documents – supporting documents for validation performed by customers, consisting of: IQ/OQ checklists incl. calibration guide and comprehensive unit documentation; parameters: temperature, CO₂, O₂, pressure, depending on unit

IQ/OQ documents – supporting documents for validation performed by customers, consisting of: IQ/OQ checklists incl. calibration guide and comprehensive unit documentation; parameters: temperature, CO₂, O₂, pressure, depending on unit

IQ/OQ/PQ documents – supporting documents for validation performed by customers, according to customer requirements, PQ section added to qualification folder IQ/OQ; parameters: temperature, CO₂, O₂ – or pressure, depending on unit

set anti-slip feet

Shaker and controller equipped with LEMO connectors, exclusively for CB with electric access port, 100 – 240 V, 50/60 Hz

Shaker and controller connected via ribbon cable, universally applicable, 100 – 240 V, 50/60 Hz

for divided inner door

for the thermally isolated stacking of two BINDER CO₂ incubators

stable, vibration-free stacking frame on casters with stop brake for safe stacking of two CB series units

stable, vibration-free stacking frame on casters with stop brake for safe stacking of two CB series units

BRONZE 3-year maintenance contract

Maintenance service as contractually agreed, visual inspection of mechanical and electrical components, check of control response, 20% discount on spare parts

CO₂ calibration

CO₂ calibration at a specified value, measurements are taken with analyzed test gas at 5%, including certificate

Execution of IQ/OQ

Execution of IQ/OQ in accordance with qualification folder

Execution of IQ/OQ/PQ

Execution of IQ/OQ/PQ in accordance with qualification folder

GOLD 3-year maintenance contract

Maintenance service as contractually agreed, visual inspection of mechanical and electrical components, check of control response, 20% discount on spare parts, testing of all key functions, replacement of wear parts, calibration of one temperature and CO₂ value, including certificate

Maintenance

One-off maintenance service in accordance with maintenance schedule. Visual inspection of mechanical and electrical components, testing of all key functions. Calibration of a test temperature specified by the user in center of usable space without certificate

SILVER 3-year maintenance contract

Maintenance service as contractually agreed, visual inspection of mechanical and electrical components, check of control response, 20% discount on spare parts, testing of all key functions, calibration of one test temperature specified by the user in the center of the usable space, without certificate

Temperature calibration

Extension of calibration of one (1) additional test temperature specified by the user in the center of the usable space, including certificate

Temperature calibration

Calibration of one (1) test temperature specified by the user in center of chamber, including certificate

Temperature measurement, 18 measuring points

Temperature measurement with 18 measuring points with a set value specified by the user, including certificate

Temperature measurement, 27 measuring points

Temperature measurement with 27 measuring points with a set value specified by the user, including certificate

Temperature measurement, 9 measuring points

Temperature measurement with 9 measuring points with a set value specified by the user, including certificate

Unit installation

Connect the unit to the customer-side connections (electricity, water, wastewater, gas), basic functions check, brief operating instructions. (excl.: unpacking, setup, controller instructions, programming, installation work)

Unit instructions

Instruction regarding operating principle and basic functions of the unit, operation of the control electronics including programming

Warranty extension from 2 to 3 years

The warranty is extended by 1 year from the delivery date, wear parts are excluded