Model MKF 240 | Dynamic climate chambers for rapid temperature changes with humidity control
Benefits
- Homogeneous climate conditions thanks to APT.line™ technology
- Automatic water and wastewater management
- Pressure humidification with fast response times
- Comprehensive programming and data acquisition
- Large heated viewing window
Product description
A BINDER MKF series environmental simulation chamber is ideally suited for any cold and heat testing based on current temperature and climate testing methods according to DIN and IEC standards. The comprehensive standard equipment for this environmental simulation chamber ensures ease of operation.
Important characteristics
- Temperature range: -40 °C to +180 °C
- Humidity range: 10 % to 98 % RH
- Integrated water-storage tank, 20 liters
- 4 zero-voltage relay contacts
- APT.line™ preheating chamber technology
- Programmable condensation protection for test material
- Heated viewing window with LED interior lighting
- Humidity regulation with capacitative humidity sensor and vapor humidification
- BINDER Multi Management Software APT-COM™ 4 Basic Edition
- Troubleshooting system with visual and audible alarms
- Intuitive touchscreen controller with time-segment and real-time programming
- Internal data logger, measured values can be read out in open format via USB
- Access port with silicone plug: 50 mm, left
- Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm
- 4 castors, two with brakes
- Computer interface: Ethernet
- Adjustable ramp function
- Integrated chart recorder
- Real-time clock
- Door heating
- Alarm notification in the event of insufficient water in fresh water tank
- 1 stainless steel rack
- Complete safety connection kit for water supply and drainage, up to 1 m height
- Inner chamber made of stainless steel
- CFC-free refrigerant R-452A
- Cooling with compressor cooling unit
Technical specifications
| Data | ||
| Designation | MKF240-400V | MKF240-480V-C |
| Article Number | 9020-0380 | 9020-0358 |
| Option model | Standard | Standard |
| Performance Data Temperature | ||
| Temperature range | -40...180 °C | -40...180 °C |
| Temperature uniformity dependent on set value | 0.1...1.5 ± K | 0.1...1.5 ± K |
| Temperature fluctuation dependent on set value | 0.1...0.5 ± K | 0.1...0.5 ± K |
| Average heating-up rate according to IEC 60068-3-5 | 5.0 K/min | 5.0 K/min |
| Cooling down time from 180°C to -40°C | 120 min | 120 min |
| Average cooling down time according to IEC 60068-3-5 | 5.0 K/min | 5.0 K/min |
| Performance Data Climate | ||
| Temperature range with humidity | 10...95 °C | 10...95 °C |
| Humidity range | 10...98 % r.F. | 10...98 % r.F. |
| Temperature fluctuation with humidity dependent on set value | 0.1...1.3 ± K | 0.1...1.3 ± K |
| Humidity fluctuation with humidity dependent on set value | ≤2,5 ± % r.F. | ≤2,5 ± % r.F. |
| Max. heat compensation at 25°C and 90% RH | 400 W | 400 W |
| Electrical data | ||
| Rated Voltage | 400 V | 480 V |
| Power frequency | 50 Hz | 60 Hz |
| Nominal power | 6,8 kW | 6,8 kW |
| Unit fuse | 16,0 A | 16,0 A |
| Phase (Nominal voltage) | 3~/N/PE | 3~ |
| Dimensions and weights | ||
| Interior volume | 8 cu.ft. | 8 cu.ft. |
| Net weight of the unit (empty) | 794 lbs | 794 lbs |
| Load per rack | 66 lbs | 66 lbs |
| Permitted load | 154 lbs | 154 lbs |
| Wall clearance back | 11,81 in | 11,81 in |
| Wall clearance sidewise | 7,87 in | 7,87 in |
| Housing dimensions not incl. fittings and connections | ||
| Width net | 43.9 in | 43.9 in |
| Height net | 67.52 in | 67.52 in |
| Depth net | 36.42 in | 36.42 in |
| Internal Dimensions | ||
| Interior width | 28.94 in | 28.94 in |
| Interior height | 27.56 in | 27.56 in |
| Interior depth | 17.44 in | 17.44 in |
| Unit doors | 1 | 1 |
| Environment-specific data | ||
| Sound-pressure level | 65 dB(A) | 67 dB(A) |
| Energy consumption at 25°C and 60% RH | 1,500 Wh/h | 1,500 Wh/h |
| Fixtures | ||
| Number of shelves (std./max.) | 1/6 | 1/6 |
Downloads
Options, Accessories, Services
Sorry, no result could be found. Check the spelling or use a new search term.
BINDER PURE AQUA SERVICE - System for preparation or complete desalination of tap water, complete set containing PURE AQUA 300 single-use cartridge, measuring device, and all necessary connecting parts
BINDER PURE AQUA SERVICE, accessories - Single-use, replacement cartridge for BINDER PURE AQUA System
Rack - stainless steel
Rack, reinforced - stainless steel, with fasteners (1 set of 4)
Shelf, perforated - Stainless steel
APT-COM™ 4 PROFESSIONAL-Edition - convenient unit and user management built on the BASIC edition. Suitable for networking up to 100 units.
APT-COM™ 4 GLP-Edition - for working under GLP-compliant conditions. Measured values are documented in a tamper-proof way in line with the requirements of FDA Regulation 21 CFR 11.
pH-neutral detergent - concentrated, for gentle remove of residual contaminants; 1 kg
Sorry, no result could be found. Check the spelling or use a new search term.
Access port with silicone plug - 30 mm, right
Access port with silicone plug - 30 mm, left
Access port with silicone plug - 50 mm, right
Access port with silicone plug - 50 mm, left
Access port with silicone plug - 80 mm, right
Access port with silicone plug - 80 mm, left
Access port with silicone plug - 80 mm, top
Pt 100 temperature sensor - additional flexible Pt 100, interior, for displaying the temperature on the unit display
Door lock - lockable door handle
Access port with silicone plug - 125 mm, right
Access port with silicone plug - 125 mm, left
Access port with silicone plug - 100 mm, top
Access port with silicone plug - 125 mm, top
Access port with silicone plug - 100 mm, right
Access port with silicone plug - 100 mm, left
Compressed air connection - for the connection to an existing pressurized air network
Dry-air purge - controlled, incl. connection; suitable for the simulation of current automobile industry standards
Notch-type access port - notch-type access port in door, 100 x 35 mm
Sorry, no result could be found. Check the spelling or use a new search term.
BRONZE 3-year maintenance contract - Annual Device Inspection Includes Preventive Maintenance with Calibration Certificate. 10% Discount on Spare Parts and Labor for any additional Services needed Wear + tear parts to be purchased or billed to customer. Travel to be quoted as separate.
Execution of IQ/OQ/PQ - Execution of IQ/OQ/PQ in accordance with qualification folder. Travel to be quoted separate.
Unit installation - Connect the unit to the customer-side connections (electricity, water, wastewater, gas), basic functions check, brief operating instructions. (excl.: unpacking, setup, controller instructions, programming, installation work) Travel to be quoted as separate.
Unit instructions - Instruction regarding operating principle and basic functions of the unit, operation of the control electronics including programming. Travel to be quoted as separate Limited to 3 hours.
Leakage test - One-off maintenance service in accordance with maintenance schedule. Visual inspection of mechanical and electrical components, testing of all key functions. Calibration of a test temperature specified by the user in center of usable space without certificate
1-year warranty extension - The warranty is extended by 1 year from the delivery date, wear parts are excluded
Preventive maintenance - One-off maintenance service in accordance with maintenance schedule. Visual inspection of mechanical and electrical components, testing of all key functions. Checking a test temperature specified by the user in center of usable space without certificate. Wear + tear parts need to be purchased or billed to customer. Travel to be quoted as separate.
SILVER 3-year maintenance contract - Annual Device Inspection Includes Preventive Maintenance with Calibration Certificate 15% Discount on Spare Parts and Labor for any additional Services needed One additional courtesy visit per year can be used for service visit or operator training. Wear + tear parts to be purchased or billed to customer. Travel to be quoted separate.
GOLD 3-year maintenance contract - Annual Device Inspection Includes Preventive Maintenance with Calibration Certificate of Temperature. 25% Discount on Spare Parts and Labor for any additional Services needed. One additional courtesy visit per year can be used for service visit or operator. Wear + tear parts to be purchased or billed to customer. Travel to be quoted separate.
Temperature and humidity calibration - Expansion –Additional Temperature and humidity calibration with 1 measuring point in center of chamber with 1 specified pair of values, including certificate. Travel to be quoted separate.
Temperature measurement, 9 temperature measuring points and 1 humidity measuring point - Temperature measurement with 9 temperature measuring points and 1 humidity measuring point in center of chamber with a pair of values specified by the user, including certificate. Travel to be quoted separate. A total of 3 shelves are required.
Temperature measurement, 18 temperature measuring points and 1 humidity measuring point - Temperature measurement with 18 temperature measuring points and 1 humidity measuring point in center of chamber with a pair of values specified by the user, including certificate. Travel to be quoted separate. A total of 2 shelves are required.
Temperature measurement, 27 temperature measuring points and 1 humidity measuring point - Temperature measurement with 27 temperature measuring points and 1 humidity measuring point in center of chamber with a pair of values specified by the user, including certificate. Travel to be quoted separate. A total of 3 shelves are required.
Temperature and humidity calibration - Temperature and humidity calibration with 1 measuring point in center of chamber with 1 specified pair of values, including certificate. Travel to be quoted separate.
Temperature and humidity measurement according to DIN12880 - Temperature measurement in accordance with DIN 12880 with 27 temperature measuring points and 1 humidity measuring point in center of chamber with a pair of values specified by the user, including certificate
Execution of IQ/OQ - Execution of IQ/OQ in accordance with qualification folder. Travel to be quoted separate.
