Model E 28 | Drying and heating chambers with mechanical adjustment
Benefits
- Uniform drying conditions thanks to APT.line™ technology
- Identical test conditions throughout the chamber interior independent of sample size and quantity
- Outstanding thermal insulation saves operation costs
Product description
With a BINDER E series heating oven, you obtain a reliable and powerful unit in a solid configuration at a very attractive price. This heating oven is preferred for tasks in basic research, as well as in human and veterinary medicine.
Important characteristics
- Temperature range: 60 °C to 230 °C
- Adjustable exhaust air flap
- Hydro-mechanical thermostat
- Class 1 temperature limitation device
- Timer 0 – 120 min
- 2 chrome-plated racks
Technical specifications
| Designation |
| Article Number |
| Option model |
| Temperature range |
| Temperature range without illumination cassettes |
| Temperature range with 100% illumination |
| Temperature uniformity dependent on set value |
| Temperature uniformity at -80°C |
| Temperature uniformity with 100% illumination |
| Temperature uniformity without illumination cassettes |
| Temperature uniformity at 37°C |
| Temperature uniformity at 100°C |
| Temperature uniformity at 150°C |
| Temperature fluctuation dependent on set value |
| Temperature fluctuation at -80°C |
| Temperature fluctuation at 37°C |
| Temperature fluctuation with 100% illumination |
| Temperature fluctuation without illumination cassettes |
| Temperature fluctuation at 100°C |
| Temperature fluctuation at 150°C |
| Heating up time to 100°C |
| Heating up time to 150°C |
| Heating up time to 37°C |
| Average heating-up rate according to IEC 60068-3-5 |
| Cooling down time from 110°C to -40°C |
| Cooling down time from 180°C to -40°C |
| Cooling down time from 180°C to -70°C |
| Cooling down time from 22°C to -80°C |
| Average cooling down time according to IEC 60068-3-5 |
| Max. heat compensation at 37°C |
| Max. heat compensation at 40°C |
| Max. heat compensation at 40°C with illumination |
| Recovery time after door was opened for 30 s at 150°C |
| Recovery time after door was opened for 30 s at 37°C |
| Temperature range with humidity and without illumination cassettes |
| Temperature range with humidity and 100% illumination |
| Temperature range with humidity |
| Humidity range |
| Humidity range without illumination cassettes |
| Humidity range with 100% illumination |
| Temperature uniformity at 25°C and 60% RH |
| Temperature uniformity at 40°C and 75% RH |
| Temperature uniformity with illumination at 25°C and 60% RH |
| Temperature uniformity with illumination at 40°C and 75% RH |
| Temperature uniformity with humidity dependent on set value |
| Temperature fluctuation at 25°C and 60% RH |
| Temperature fluctuation at 40°C and 75% RH |
| Temperature fluctuation with illumination at 25°C and 60% RH |
| Temperature fluctuation with illumination at 40°C and 75% RH |
| Temperature fluctuation with humidity dependent on set value |
| Humidity fluctuation at 25°C and 60% RH |
| Humidity fluctuation at 40°C and 75% RH |
| Humidity fluctuation with illumination at 25°C and 60% RH |
| Humidity fluctuation with illumination at 40°C and 75% RH |
| Humidity fluctuation with humidity dependent on set value |
| Recovery time after door was opened for 30 s at 25°C and 60% RH |
| Recovery time after door was opened for 30 s at 40°C and 75% RH |
| Recovery time after door was opened for 30 s with illumination at 25°C and 60% RH |
| Recovery time after door was opened for 30 s with illumination at 40°C and 75% RH |
| Max. heat compensation at 25°C and 90% RH |
| CO₂ range |
| CO₂ measuring technology |
| CO₂ recovery time after door was opened for 30 s at 5 vol. % CO₂ |
| Standard O₂ control range |
| O₂ control ranges with option: O₂ range |
| O₂ recovery time after door was opened for 30 s at 5 vol. % O₂ |
| ICH compliant illumination for photo stability testing |
| ICH compliant illumination for photo stability testing |
| Daylight tubes |
| Daylight tubes |
| Fluora® growth lamps |
| Arabidopsis lamps |
| Air circulation (approx.) |
| Volumetric flow rate of exhaust air acc. to EN 1539 at 50 °C |
| Air change rate at 100°C |
| Air change rate at 150°C |
| Permitted end vacuum |
| Leckrate |
| Pressure fluctuation over time at 50 mbar |
| Pressure fluctuation over time at 400 mbar |
| Highest permitted solvent quantity (at T-180°C, M-100g/mol, U-40g/m3, K=0,5) |
| Rated Voltage |
| Power frequency |
| Nominal power |
| Unit fuse |
| Phase (Nominal voltage) |
| Vacuum connection with small flange |
| Measuring access port with small flange |
| Inert gas connection with flow limiter (RP") |
| Compressed air connection for pressure-encapsulation |
| Interior volume |
| Net weight of the unit (empty) |
| Load per rack |
| Permitted load |
| Wall clearance back |
| Wall clearance sidewise |
| Width net |
| Height net |
| Depth net |
| Interior width |
| Interior height |
| Interior depth |
| Viewing window width |
| Viewing window height |
| Inner doors |
| Unit doors |
| Sound-pressure level |
| Average heat compensation at set value -80°C and Ta = 21°C |
| Energy consumption at 25°C and 60% RH |
| Energy consumption at 100°C |
| Energy consumption at 150°C |
| Energy consumption at 20°C |
| Energy consumption at 37°C |
| Energy consumption at 37°C and 75% RH |
| Energy consumption at 37°C and with illumination |
| Energy consumption at 40°C and 75% RH |
| Energy consumption at 85°C and 85% RH |
| Energieverbrauch bei Sollwert -80 °C und Tᵤ = 20 °C |
| Number of shelves (std./max.) |
| Number of illumination cassettes (std./max.) |
| Freezer racks per compartment |
| Cryoboxes, 50 mm |
Downloads
Options, Accessories, Services
Sorry, no result could be found. Check the spelling or use a new search term.
Rack - chrome plated
Shelf, perforated - Stainless steel
pH-neutral detergent - concentrated, for gentle remove of residual contaminants; 1 kg
Sorry, no result could be found. Check the spelling or use a new search term.
Sorry, no result could be found. Check the spelling or use a new search term.
Temperature calibration - Extension of calibration of one (1) additional test temperature specified by the user in the center of the usable space, including certificate Travel to be quoted separate.
1-year warranty extension - The warranty is extended by 1 year from the delivery date, wear parts are excluded
BRONZE 3-year maintenance contract - Annual Device Inspection Includes Preventive Maintenance with Calibration Certificate. 10% Discount on Spare Parts and Labor for any additional Services needed Wear + tear parts to be purchased or billed to customer. Travel to be quoted as separate.
SILVER 3-year maintenance contract - Annual Device Inspection Includes Preventive Maintenance with Calibration Certificate 15% Discount on Spare Parts and Labor for any additional Services needed One additional courtesy visit per year can be used for service visit or operator training. Wear + tear parts to be purchased or billed to customer. Travel to be quoted separate.
GOLD 3-year maintenance contract - Annual Device Inspection Includes Preventive Maintenance with Calibration Certificate of Temperature. 25% Discount on Spare Parts and Labor for any additional Services needed. One additional courtesy visit per year can be used for service visit or operator. Wear + tear parts to be purchased or billed to customer. Travel to be quoted separate.
Preventive maintenance - One-off maintenance service in accordance with maintenance schedule. Visual inspection of mechanical and electrical components, testing of all key functions. Checking a test temperature specified by the user in center of usable space without certificate. Wear + tear parts need to be purchased or billed to customer. Travel to be quoted as separate.
Temperature calibration - Calibration of one (1) test temperature specified by the user in center of chamber, including certificate Travel to be quoted separate.
Unit installation - Connect the unit to the customer-side connections (electricity, water, wastewater, gas), basic functions check, brief operating instructions. (excl.: unpacking, setup, controller instructions, programming, installation work) Travel to be quoted as separate.
Unit instructions - Instruction regarding operating principle and basic functions of the unit, operation of the control electronics including programming. Travel to be quoted as separate Limited to 3 hours.