Constant climate chamber with humidity KBF 115: KBF series from BINDER / BINDER GmbH

Constant climate chamber with humidity

The BINDER KBF is the specialist for unconditionally reliable stability testing and precise maintenance of constant climate conditions. From programming to documentation, this constant climate chamber meets all critical requirements.

Advantages:

Long-term stable test conditions
Independent of the water supply
Complete solution: Temperature/humidity simulation in one chamber

Areas of application:

Cosmetics Industry
Food / Beverage
Pharmaceuticals Industry
Packaging Industry

Features	Customer benefits	Characteristics
APT.line™ climate technology	Same test conditions throughout the chamber interior Independent of specimen size and quantity	APT.line™ Constant and gentle circulation of air through large-surface side walls even under a full load Homogeneous climate conditions throughout test specimens
Water supply	Flexible solution independent of water supply and installation site Easy plug-and-play handling	Direct connection to the domestic water system Convenient water treatment with BINDER PURE AQUA SERVICE Sewage pump for discharges up to 1 m in height
Humidification system	Very accurately measured values Minimal maintenance requirements FDA-compliant test results	Vapor pressure humidification for fast response times Drift-free, capacitive humidity sensor Short recovery time after door opening
Cooling system	Reliable test results even under extreme climate and site conditions Stable, long-term tests according to GLP/GMP Large power reserves, e.g. for lighting applications	Powerful compressor cooling system for ambient temperatures up to 32 °C No freezing thanks to double evaporator plate
Standard equipment	No extra costs Chamber is easily moved on casters Condensation-free glass door for clear viewing and constant climate	Comprehensive standards Ethernet interface Access port diameter 30 mm Casters from 240 l volume Inner glass door with seal and double outer door seal Door heated against condensation
Controller	All measured values read at a glance Convenient documentation Easy operation Convenient HMI (Human Machine Interface)	MCS screen controller 25 program memory Digital continuous-line recorder for monitoring limits Alarm function
Qualification	FDA- and GLP/GMP-compliant documentation Maximum process stability FDA approved for several years	More than 10 years of experience with: GLP/GMP, IQ, OQ, PQ, DQ FDA-compliant software APT-COM™ Years of proven and recognized validation and documentation materials
Accessories and Services	Complete solution Everything from one source BINDER Service is always nearby	Various options: BINDER Data Logger Kits, GLP compliance, access ports in various sizes and positions, object temperature measurement Worldwide service network

Electronically controlled APT.line™ preheating chamber and refrigerating system assuring temperature accuracy and reproducible results
Temperature range 0 °C to 70 °C (without humidity)
Temperature range 10 °C to 70 °C (with humidity)
Humidity range 10 % to 80 % RH
MCS controller with 25 storable programs of 100 sections each for a maximum of 500 program segments
- User friendly LCD screen
- Easy-to-read menu guide
- Integrated electronic chart recorder
- Variety of options for the graphic display of process parameters
- Real time clock
Electronically controlled humidification and dehumidification system with capacitive humidity sensor
Suitable for stability tests according to ICH guideline Q1A
Inner glass door with sealing
Independent adjustable temperature safety device class 3.1 (DIN 12880), with visual and audible temperature alarm
Access port with silicone plug Ø 30 mm, left side
Safety connection kit for water supply and drainage, including water hose up to 1 m Height
Ethernet interface for GLP/GMP and the FDA guideline 21 CFR Part 11 compliant APT-COM™ DataControl-System software
2 stainless steel racks
BINDER test confirmation

	KBF 115 (E5.2)
	Exterior dimensions
	Width (mm)	885
	Height (incl. feet) (mm)	1050
	Depth (incl. door handle, I-triangle, connection 80 mm) (mm)	730
	Wall clearance, rear (mm)	100
	Wall clearance, side (mm)	100
	Steam space volume (l)	156
	Number of doors (ea.)	1
	Inner glass door(s) (ea.)	1

	Interior dimensions
	Width (mm)	600
	Height (mm)	483
	Depth (mm)	351
	Interior volume (l)	102
	Racks (number standard/max.)	2 / 5
	Load per rack (kg)	30
	Permitted total load (kg)	100
	Weight (empty) (kg)	129

	Temperature data (without humidity)
	Temperature range (°C)	0 - 70
	Temperature variation at 25 °C (± K)	0,2
	Temperature variation at 40 °C (± K)	0,2
	Temperature fluctuation (± K)	0,1
	Max. heat compensation up to 40 °C (W)	200

	Climate data (with humidity)
	Temperature range (°C)	10 - 70
	Temperature variation
	at 25 °C / 60 % RH (± K)	0,2
	at 40 °C / 75 % RH (± K)	0,2
	Temperature fluctuation
	at 25 °C / 60 % RH (± K)	0,1
	at 40 °C / 75 % RH (± K)	0,1
	Humidity range (% RH)	10 - 80
	Humidity fluctuation
	at 25 °C / 60 % RH (± % RH)	≤ 2
	at 40 °C / 75 % RH (± % RH)	≤ 2
	Recovery time after door was opened for 30 sec
	at 25 °C / 60 % RH (min.)	15
	at 40 °C / 75 % RH (min.)	8

	Electrical data
	Voltage (± 10 %) 50 / 60 Hz (V)	200 - 240, 1 N ~
	Nominal power (kW)	2,0
	Energy consumption 40 °C / 75 % RH (W) 1)	470
	Noise level approx. (dB (A))	52

Temperature-humidity chart

A: Guaranteed condensation free range / B: Temporary usable operation (up to 24 h)

Heat compensation

1) These values can be used for dimensioning air condition systems.

All technical data are specified for units with standard equipment at an ambient temperature of 25 °C and a line voltage fluctuation of ±10%. The temperature data is determined in accordance to factory standard following DIN 12880, respecting the recommended wall clearances of 10% of the height, width and depth of the inner chamber. All figures are typical average values for series devices. We reserve the right to alter technical specifications at any time.

BINDER Pure Aqua Service

This convenient and flexible water treatment system extends maintenance intervals and is easily implemented independent of water quality.
The specific advantage: Point-of-use system with water quality display and replaceable filter cartridge

BINDER Data Logger Kits

The new BINDER Data Logger Kits – Makes independent recording of temperature and humidity data in the BINDER device possible. The tailored product solution contains helpful accessories: from mounting the logger to the BINDER device to cable access assistance to the sensor mount

External water supply set

External water supply set from fresh and waste water container, wiring and pump

APT-COM™ DataControlSystem GLP Edition

Software for GLP-compliant control, programming and documentation. Allows networking of up to 30 devices or controllers. Meets FDA 21 CFR Part 11 requirements

Access port

With silicone plugs for introducing external measuring instruments into the chamber, access ports with 30, 50 or 100 mm diameters

Calibration certificate & validation

BINDER can significantly reduce the workload in qualifying and validating devices. Nobody knows our devices as well and has as much experience in certifications as we do

Temperature measurement of the specimen

Additional PT 100 temperature sensor for accurate temperature measurement of the specimen and digital display of measured values. Recording of measured data via Ethernet or RS 422 interface optional

KBF 115 (E5.2)
Access ports with silicone plug 30, 50, 100 mm	O
Securing elements for additional fastening of racks (1 set of 4 pieces)	O
Keyboard lock	O
Additional PT 100 temperature sensor, flexibly installed, with external connection, including DIN connector (6-pin)	O
RS 422 interface for communication software APT-COM™ DataControlSystem	O
External fresh water supply set consits of fresh and waste water tank with 20 liter each, cabling and pump	O
BINDER PURE AQUA SERVICE consisting of disposible cartridge, hose set and measuring unit	O
Disposable cartridge for BINDER PURE AQUA SERVICE	O
Factory calibration certificate for temperature and humidity. Measurement in center of chamber at 25 °C / 60 % RH or at specified values	O
Extension to factory calibration certificate for temperature and humidity. Each additional measurement at an additional measuring point or set of values	O
Temperature precision measurement according to DIN 12880 and 9-point humidity measurement / factory standard with measurement log and certificate, measured at 25 °C / 60 % RH or at specified values	O
Data Logger Kit TH 70: For the continuous temperature and humidity recording of -40 °C to 70 °C / 0 % to 100 % RH. Kit includes 1 data logger, 1 attachable combined humidity/temperature sensor with 2 m extension cable and 1 fixture for the connection at the BINDER unit	O
Data Logger Kit TH 70/70: With two attachable combined sensors. One for the continuous temperature and humidity recording of -40 °C to 70 °C / 0 % to 100 % RH. Second one at the data logger for recording the environmental conditions. Kit includes 1 data logger, 2 attachable combined humidity/temperature sensors with 2 m extension cable and 1 fixture for the connection at the BINDER unit	O
Data Logger Kit T 220: For the continuous temperature recording of -90 °C to 220 °C. Kit includes 1 data logger, PT 100 sensor with 2 m Teflon extension cable and 1 fixture for the connection at the BINDER unit	O
Data Logger Software: Configuration und evaluation software for all BINDER Data Logger Kits, incl. data cable (RS 232)	O
Rack, stainless steel	O
Shelf, perforated, stainless steel	O
Temperature safety device, class 3.3 (DIN 12880) with visual alarm	O
4-20 mA analog output for temperature and humidity measurements (e.g. chart recorder connection), with 6-pin DIN socket. Outputs are adjusted automatically as the controller is adjusted	O
Zero-voltage relay alarm outputs for temperature (±2 °C) and humidity (±5 % RH), accessible via 6-pin DIN socket, with audible signal that can be switched off (maximum power rating 24 V AC/DC, 2.5 A)	O
Waterproof interior socket 230 V AC (max. 200 W), IP65 protected, with corresponding plug (IP66 protected) Max. allowed operating temperature 50 °C	O
Locking door handle with key	O
Interior lighting (15 W)	O

BINDER KBF 115: Constant climate chamber with humidity - ideal for your stability testing

The BINDER KBF series