Heating oven FD 240: FD series from BINDER / BINDER Inc.

Heating oven with mechanical convection

A BINDER FD series heating oven is always used when fast drying and sterilization is required. Thanks to its fully homogeneous temperature distribution, quick dynamics and powerful fan, this heating oven saves valuable time.

Advantages:

Fast, even tempering
Wide temperature range
Quality "Made in Germany"

Areas of application:

Electronics / Semiconductor Industry
Basic Research / Research Institutes
Plastics Industry

Features	Customer benefits	Characteristics
APT.line™	Quick tempering Identical test conditions throughout the chamber interior Independent of specimen size and quantity	APT.line™ for maximum precision Uniform circulation even under full load Homogeneous temperature conditions throughout specimen material
Temperature range	Broad range of applications Short warm up times	Standard up to 300 °C (572 °F) Large power reserves
Inner chamber concept	Maximum occupational safety Easy loading and unloading of specimen material Easy cleaning	Inner chamber made of stainless steel Very tight door closure with 2-point door latch Low heat dissipation due to 60 mm (2.36 inch) insulation Rack with tilt protection No permanent fixtures
Standard equipment	Reliable, easy handling	Comprehensive standards Microprocessor control Ergonomically positioned controller. PT 100 temperature sensor
Quality	Reliable devices with long service lives Short delivery times Minimal maintenance and operating costs	Premium quality Highly automated Series production High-quality materials, state-of-the-art production technology High standard according to DIN 12880 (27-point measurement)
Accessories and Services	Flexible solution in terms of size, type and equipment Optimal solution for numerous applications BINDER INDIVIDUAL for customer-specific solutions Worldwide BINDER Service	Comprehensive product portfolio Size 23 to 240 liters (0.7 to 8.5 cu.ft.) Additional product lines with humidity, light, CO2 or vacuum Voltage variants (UL) and certificates Various options: Door with viewing window, access ports, reinforced shelves, Data Logger Kits Worldwide service network

Electronically controlled APT.line™ preheating chamber assuring temperature accuracy and reproducible results
Temperature range from 5 °C (9 ºF) above ambient temperature to 300 °C (572 °F)
DS control with integrated timer 0 to 99 hrs
Digital temperature setting with an accuracy of one degree
Independent adjustable temperature safety device class 2 (DIN 12880), with visual temperature alarm
Adjustable front ventilation flap slide and rear exhaust Ø 50 mm (1.97 inch)
Units up to 115 liters (4.1 cu.ft.) are stackable
2 chrome-plated racks included
BINDER test confirmation

	FD 240
	Exterior dimensions
	Width (mm/inch)	1035 / 40.8
	Height (incl. feet) (mm/inch)	825 / 32.5
	Depth (mm/inch)	745 / 29.3
	Plus door handle and connection (mm/inch)	105 / 4.1
	Wall clearance, rear (mm/inch)	100 / 3.9
	Wall clearance, side (mm/inch)	160 / 6.3
	Exhaust duct (outer Ø mm/inch)	52 / 2.1
	Steam space volume (l /cu.ft.)	308 / 10.9
	Number of doors (ea.)	2

	Interior dimensions
	Width (mm/inch)	800 / 31.5
	Height (mm/inch)	600 / 23.6
	Depth (mm/inch)	500 / 19.7
	Interior volume (l/cu.ft.)	240 / 8.6
	Racks (number standard/max.)	2 / 7
	Load per rack (kg/lbs.)	30 / 66
	Permitted total load (kg/lbs.)	70 / 155
	Weight (empty) (kg/lbs.)	96 / 212

	Temperature data
	Temperature range approx. 5 °C (9 ºF) above ambient temperature to (°C/°F)	300 / 572
	Temperature variation
	at 70 °C (158 °F) (± K)	0.8
	at 150 °C (302 °F) (± K)	2
	at 300 °C (572 °F) (± K)	4.3
	Temperature fluctuation at 70 °C (158 °F) (± K)	0.3
	Warm-up time 1)
	to 70 °C (158 °F) (min.)	11
	to 150 °C (302 °F) (min.)	24
	to 300 °C (572 °F) (min.)	50
	Recovery time after doors were open for 30 sec. 1)
	at 70 °C (158 °F) (min.)	2
	at 150 °C (302 °F) (min.)	6
	at 300 °C (572 °F) (min.)	13

	Ventilation data
	Ventilation	20
	at 70 °C (158 °F) (x/h)	19
	at 150 °C (302 °F) (x/h)	20
	at 300 °C (572 °F) (x/h)	18

	Electrical data
	IP protection class acc. to EN 60529	IP 20
	Nominal voltage (± 10%) 50 / 60 Hz (V)	230
	Nominal voltage (± 10%) 60 Hz (V)	208
	Nominal power (kW)	2.7
	Energy consumption
	at 70 °C (158 °F) (W)	370
	at 150 °C (302 °F) (W)	850
	at 300 °C (572 °F) (W)	1400

1) To 98% of the set value

All technical data are specified for units with standard equipment at an ambient temperature of 25 °C (77 °F) and a line voltage fluctuation of ±10%. The temperature data is determined in accordance to factory standard following DIN 12880, respecting the recommended wall clearances of 10% of the height, width and depth of the inner chamber. All figures are typical average values for series devices. We reserve the right to alter technical specifications at any time.

Numerous access ports

With silicone plugs for introducing external measuring instruments into the chamber, access ports with 10, 30, 50, 100 mm (0.4, 1.2, 2.0, 3.9 inch) diameters.

Door with window and interior lighting

For optimal process control in the inner chamber, available for all device sizes.

Door lock

Prevents unauthorized access to the process sequences in the chamber.

Calibration certificate & validation

BINDER can significantly reduce the workload in qualifying and validating devices. Nobody knows our devices as well and has as much experience in certifications as we do.

FD 240
Access ports with silicone plug, 10, 30, 50, 100 mm (0.4, 1.2, 2.0, 3.9 inch)	O
Anti-slip rubber pads for safe stacking (1 set of 4 pieces)	O
Independent adjustable temperature safety device class 3.1 (DIN 12880) with optical alarm	O
Analog temperature output, 4 - 20 mA with 6-pin DIN socket (output not adjustable)	O
Over temperature alarm, audible, can be switched off. Temperature limit can be set at the independent, adjustable temperature safety device	O
Securing elements for additional fastening of racks (1 set of 4 pieces)	O
Temperature measurement acc. to DIN 12880 at 150 °C or at specified testing temperature with measuring protocol and certificate	O
Factory calibration certificate. Measurement in center of chamber at 150 °C (302 °F) or at specified testing temperature	O
Extension to factory calibration certificate. Each additional measurement at additional measuring point or temperature	O
Data Logger converter cable RS 232 to USB 2.0	O
Data Logger Kit T 350: For continuous temperature recording of 0 °C to 350 °C. Kit includes 1 data logger, PT 100 sensor with 2 m Teflon extension cable and 1 fixture for mounting to the BINDER unit	O
Data Logger Software: Configuration and evaluation software for all BINDER Data Logger Kits, incl. data cable	O
Rack, chrome-plated	O
Rack, stainless steel	O
Reinforced rack, stainless steel, with 1 set of fasteners (4 pieces), max. load 70 kg (15.4 lbs.)	O
Shelf, perforated, stainless steel	O
Locking door handle with key	O
Door gasket, FKM (Viton)	O
Base on castors	O
2 doors each with window 350 x 240 mm (13.9 x 9.5 inch) and interior lighting (30 W)	O

BINDER FD 240: Heating oven with mechanical convection for uniform air circulation even under full load

The BINDER FD series