Size ranges of MK series

Environmental simulation chamber for cyclical temperature

The BINDER environmental simulation chamber of the MK series is suitable for heat or cold testing between -40 °C and 180 °C (-40 °F and 356 °F). The APT.line™ preheating chamber technology uniquely simulates a natural environment. For cyclical temperature testing, this environmental simulation chamber is a smart alternative to complex individual solutions.


Advantages:

  • State-of-the-art reliability
  • User-friendly chamber interior
  • Comprehensive standard equipment
Areas of application:
Automotive
Automotive
Electronics / Semiconductor Industry
Electronics / Semiconductor Industry
Plastics Industry
Plastics Industry
Features Customer benefits Characteristics
APT.line™ climate technology
  • Same test conditions throughout the chamber interior
  • Independent of specimen size and quantity

APT.line™

  • Uniform circulation even under full load
  • Homogeneous climate conditions throughout test specimens
Standard equipment
  • Very good price/performance ratio

Well equipped

  • Heated viewing window
  • LED illumination
  • Rugged chassis with rollers from 115 liters (4.1 cu.ft.)
Unit design
  • Minimum space requirements
  • Convenient, safe access
  • Easy assembly

Good use of space

  • Optimal ratio of usable space and footprint
  • All operator controls accessible from the front
  • Wide construction
Production
  • Reliable devices with long service lives
  • Short delivery times
  • Premium quality made in Germany
  • Highly automated series production (20,000 units per year)
  • High-quality materials, state-of-the-art production technology
Accessories and Services
  • Complete system from one source

Comprehensive product portfolio

  • Additional production lines with drying and vacuum chambers
  • Control and documentation software APT-COM™
  • BINDER Data Logger Kits
  • Water treatment with BINDER PURE AQUA SERVICE
  • Years of proven and recognized validation and documentation materials
  • Electronically controlled APT.line™ preheating chamber assuring temperature accuracy and reproducible results
  • Temperature range of -40 °C to 180 °C (-40 °F to 356 °F)
  • MCS controller with 25 storable programs of 100 sections each for a maximum of 500 program segments
    • User friendly LCD screen
    • Easy-to-read menu guide
    • Integrated electronic chart recorder
    • Variety of options for the graphic display of process parameters
    • Real time clock
  • Adjustable ramp function via program editor
  • Access port Ø 50 mm (1.97 inch), left side
  • Heated viewing window with LED interior lighting
  • Temperature safety device class 2 (DIN 12880) with visual and audible temperature alarm
  • Ethernet interface for communication software APT-COM™ DataControlSystem
  • 1 stainless steel rack
  • BINDER technical specification conformance certificate
  • BINDER Communication software APT-COM™ 3 Basic Edition
MK 115 (E3.1)
Exterior dimensions
Housing
Width (mm/inch) 980 / 38.6
Height (incl. feet/castors) (mm/inch) 1725 / 67.9
Depth (plus connections and fittings) (mm/inch) 845 / 33.3
Depth (incl. connections and fittings) (mm/inch) 935 / 36.8
Wall clearance, side (mm/inch) 200 / 7.9
Wall clearance, rear (mm/inch) 300 / 11.8
Viewing window width (mm/inch) 288 / 11.3
Viewing window height (mm/inch) 222 / 8.7
Number of doors (ea.) 1
     
Interior dimensions
Width (mm/inch) 600 / 23.6
Height (mm/inch) 480 / 18.9
Depth (mm/inch) 400 / 15.8
Interior volume (l/cu.ft.) 115 / 4.1
Racks (number standard/max.) 1 / 4
Load per shelf (kg/lbs.) 30 / 66
Permitted total load (kg/lbs.) 60 / 132
Weight (empty) (kg/lbs.) 260 / 574
     
Temperature data
Temperature range (°C/°F) -40 - 180 / -40 - 356
Temperature variation (±K) 0.1 - 2.0
Temperature fluctuation (±K) 0.1 - 0.5
Mean warm-up rate acc. to IEC 60068-3-5 (°C/min.) 5.0
Mean cooling rate acc. to IEC 60068-3-5 (°C/min.) 5.0
Heat compensation, max. (W) 2000
     
Electrical data
IP protection class acc. to EN 50529 IP 20
Voltage (± 10 %) 50 Hz (V), 3~ 400
Nominal power (kW) 3.5
Energy consumption at 20 °C (68 °F) (W) 1) 650
Noise level (approx. dB(A)) 62

Heating up and cooling down rate

Heat compensation

1) These values can be used for dimensioning air condition systems.

All technical data are specified for units with standard equipment at an ambient temperature of 25 °C (77 °F) and a line voltage fluctuation of ±10%. The temperature data is determined in accordance to factory standard following DIN 12880, respecting the recommended wall clearances of 10% of the height, width and depth of the inner chamber. All figures are typical average values for series devices. We reserve the right to alter technical specifications at any time.

BINDER Data Logger Kits

BINDER Data Logger Kits

The new BINDER Data Logger Kits – Makes independent recording of temperature data in the BINDER device possible. The tailored product solution contains helpful accessories: from mounting the logger to the BINDER device to cable access assistance to the sensor mount

Access port

Access port

With silicone plugs for introducing external measuring instruments into the chamber, access ports with 30, 50, 80, 100, 125 mm (1.18, 1.97, 3.15, 3.94, 4.72 inch)  diameters

Notch-type access port in door

Notch-type access port in door

Provides easy connection of cables to test specimens and facilitates loading and unloading of the chamber. Doors have access ports measuring 100 x 35 mm (3.93 x 1.38 inch), which can be sealed with the included silicone plugs

Reinforced rack

Reinforced rack

To ensure safe and stable storage of heavy test specimens

APT-COM™ DataControlSystem GLP Edition

APT-COM™ DataControlSystem GLP Edition

Software for GLP-compliant control, programming and documentation. Allows networking of up to 30 devices or controllers. Meets FDA 21 CFR Part 11 requirements

Analog outputs

Analog outputs

For temperature or temperature and humidity 4 - 20 mA with 6-pin DIN socket (output cannot be adjusted)

Calibration certificate + validation

Calibration certificate + validation

BINDER can significantly reduce the workload in qualifying devices. Nobody knows our devices as well and has as much experience in certifications as we do

MK 115 (E3.1)
Access ports with silicone plug 30, 50, 80, 100, 125 mm (1.18, 1.97, 3.15, 3.94, 4.72 inch) O
Securing elements for additional fastening of racks (1 set of 4 pieces) O
Keyboard lock O
Analog temperature output, 4-20 mA, with 6-pin DIN socket (output not adjustable) O
Factory calibration certificate. Measurement in center of chamber at 150 °C (302 °F) or at specified testing temperature O
Extension to factory calibration certificate. Each additional measurement at an additional measuring point or temperature O
Additional measuring channel for digital display of specimen temperature, with flexible PT 100 temperature sensor. Measuring data recorded through device interface O
Data Logger Kit T 220: For the continuous temperature recording of -90 °C to 220 °C (-130 °F - 428 °F). Kit includes 1 data logger, PT 100 sensor with 2 m Teflon extension cable and 1 fixture for the connection at the BINDER unit O
Data Logger Software: Configuration und evaluation software for all BINDER Data Logger Kits, incl. data cable (RS 232) O
Rack, stainless steel O
Reinforced rack, stainless steel, with 1 set of securing elements (1 set of 4 pieces), max. load 70 kg (154 lbs.) O
Shelf, perforated, stainless steel O
Notch-type access port in door, 100 x 35 mm (3.93 x 1.38 inch) O
Temperature safety device for preventing too low and high temperatures, class 2 O
Zero-voltage relay outputs accessible via 6-pin DIN socket. Additional module for controlling 3 relay outputs via 3 of the programmable controller’s controller contacts O
RS 422 interface O
Locking door handle with key O
Unregulated compressed air-dryer O


Contact

Are you interested in further information on products and services?

Contact us
Technical support

Do you have a technical problem and need assistance in trouble-shooting?

Use our service form.

Request technical service
Newsletter subscription
Product inquiry MK 115 (E3.1)

Interested in


Your details


Data storage and data sharing


Please fill in all required fields

(*) Required fields