Microbiological incubators from the APT.line™

• BD series
• BF series
• KB series

• BD series
• BD 23
• BD 53
• BD 115
• BD 240
• BD 400
• BD 720

• Electronically controlled APT.line™ preheating chamber technology
• Temperature range of 5 °C (9 °F) above ambient temperature up to 100 °C (212 °F)
• DS controller with integrated timer 0 to 99 hours
• Digital temperature setting with tenth of a degree accuracy
• Independent adjustable temperature safety device, Class 3.1 (DIN 12880), with visual alarm
• Adjustable ventilation by means of rear exhaust duct, 50 mm (2 inch) diameter with ventilation flap and front ventilation slide
• Inner glass door
• RS 422 interface for communication software APT-COM™ DataControlSystem
• Units up to 115 liters (4.1 cu.ft.) are stackable
• 2 chrome-plated racks
• Only at BINDER: Precision regardless of size – the 20-liter (0.7 cu.ft) bench-top units.
• BINDER test certificate

1) up to 98 % of the set value

All specified technical data apply for standard equipment operating at an ambient temperature of + 25 °C (77 °F), with line voltage fluctuations of ± 10%. These typical average values for series equipment were determined in accordance with the BINDER factory standard. They are based upon the recommended distances from the inner chamber walls, namely 10% of height, width and depth. Differing ambient temperatures or variances in the design of individual equipment may produce different performance data.

We therefore recommend that equipment be calibrated and/or validated on a case-by-case basis when working at the extremes of the permissible ambient temperature range.

• 

  Waterproof interior power socket in the inner chamber

  Connected to the main switch. To connect ancillary equipment inside the chamber.
• 

  Additional PT 100 temperature sensor

  In situ or flexible installation for exact temperature measurement within the specimen material; connects to a special plug on the back wall of the inner chamber.
• 

  Acoustic alarm

  Activates in the event of excess temperature, with adjustable setpoint at the temperature controller. Acoustic alarm can be switched off.
• 

  Lockable door

  Prevents unauthorized access and interference with processes in the chamber.
• 

  Petri dish rack

  For fast and organized loading of specimens. Available in stainless steel or with different color coding for rapid identification of batches.
• 

  Calibration certificates and validation

  BINDER can significantly reduce the time and effort needed for equipment qualification and validation. We draw on unparalleled knowledge of our equipment applications and years of experience in certification.
• 

  Access ports

  With silicon plugs for inserting external measuring devices into the chamber. Access ports with 10, 30, 50 mm (0.4, 1.2, 2 inch) diameter.
• 

  Reinforced refrigeration system

  Provides constant low temperature in the interior in the case of additional heat input.

O Option     - not available

Technical specifications subject to change