Heating chamber FED 115: FED series from BINDER / BINDER GmbH

Heating chamber with mechanical convection

The multi-talented BINDER heating chamber of the FED series provides almost unlimited capacity and is particularly adaptable. With advanced timing functions and a digitally controllable fan, this heating chamber easily controls temperature and convection conditions.

Advantages:

Fast, even tempering
Wide temperature range
Quality "Made in Germany"

Areas of application:

Electronics / Semiconductor Industry
Basic Research / Research Institutes
Plastics Industry

Features	Customer benefits	Characteristics
APT.line™	Quick drying Identical test conditions throughout the chamber interior Independent of specimen size and quantity	APT.line™ for maximum precision Uniform circulation even under full load Homogeneous temperature conditions throughout specimen material
Temperature range	Broad range of applications Short warm up times	Standard up to 300 °C Large power reserves
Inner chamber concept	Maximum occupational safety Easy loading and unloading of specimen material Easy cleaning	Inner chamber made of stainless steel Very tight door closure with 2-point door latch Low heat dissipation due to 60 mm insulation Rack with tilt protection No permanent fixtures
Standard equipment	Reliable, easy handling	Comprehensive standards Microprocessor control Ergonomically positioned controller. RS 422 interface PT 100 temperature sensor
Quality	Reliable devices with long service lives Short delivery times Minimal maintenance and operating costs	Premium quality Highly automated Series production High-quality materials, state-of-the-art production technology High standard according to DIN 12880 (27-point measurement)
Accessories and Services	Flexible solution in terms of size, type and equipment Optimal solution for numerous applications BINDER INDIVIDUAL for customer-specific solutions Worldwide BINDER Service	Comprehensive product portfolio Size 53 to 720 liters Additional product lines with humidity, light, CO2 or vacuum Voltage variants (UL) and certificates Various options: Door with viewing window, access ports, reinforced shelves, Data Logger Kits Worldwide service network

Electronically controlled APT.line™ preheating chamber assuring temperature accuracy and reproducible results
Temperature range from 5 °C above ambient temperature to 300 °C
MS controller with several timer functions
Controller timer functions: delayed ON, delayed OFF, temperature dependent delayed OFF
- Digital temperature setting with an accuracy of one degree
Adjustable fan speed
Front ventilation flap slide and rear exhaust duct Ø 50 mm (1.97 inch)
Independent adjustable temperature safety device class 2 (DIN 12880), with visual temperature alarm
RS 422 interface for use with APT-COM™ DataControlSystem communication software or switch over to printer output with RS 232 / RS 422 interface converter
Units up to 115 liters are stackable
2 chrome-plated racks included
BINDER test confirmation

	FED 115
	Exterior dimensions
	Width (mm)	835
	Height (incl. feet) (mm)	705
	Depth (mm)	645
	Plus door handle and connection (mm)	105
	Wall clearance, rear (mm)	100
	Wall clearance, side (mm)	160
	Exhaust duct (outer Ø mm)	52
	Steam space volume (l)	158
	Number of doors (ea.)	1

	Interior dimensions
	Width (mm)	600
	Height (mm)	480
	Depth (mm)	400
	Interior volume (l)	115
	Racks (number standard/max.)	2 / 6
	Load per rack (kg)	20
	Permitted total load (kg)	50
	Weight (empty) (kg)	62

	Temperature data
	Temperature range approx. 5 °C above ambient temperature to (°C)	300
	Temperature variation
	at 70 °C (± K)	0,7
	at 150 °C (± K)	1,8
	at 300 °C (± K)	3,9
	Temperature fluctuation (± K)	0,3
	Warm-up time 1)
	to 70 °C (min.)	7
	to 150 °C (min.)	30
	to 250 °C (min.)	49
	Recovery time after doors were open for 30 sec. 1)
	at 70 °C (min.)	2
	at 150 °C (min.)	8
	at 300 °C (min.)	15

	Ventilation data
	Ventilation
	at 70 °C (x/h)	29
	at 150 °C (x/h)	32
	at 300 °C (x/h)	26

	Electrical data
	IP protection class acc. to EN 60529	IP 20
	Voltage (± 10%) 50 / 60 Hz (V)	230
	Nominal power (kW)	1,6
	Energy consumption
	at 70 °C (W)	230
	at 150 °C (W)	544
	at 300 °C (W)	1100

1) To 98% of the set value

All technical data are specified for units with standard equipment at an ambient temperature of 25 °C and a line voltage fluctuation of ±10%. The temperature data is determined in accordance to factory standard following DIN 12880, respecting the recommended wall clearances of 10% of the height, width and depth of the inner chamber. All data was determined at 100% of fan speed. All figures are typical average values for series devices. We reserve the right to alter technical specifications at any time.

Numerous access ports

With silicone plugs for introducing external measuring instruments into the chamber, access ports with 10, 30, 50, 100 mm diameters.

Door with window and interior lighting

For optimal process control in the inner chamber, available for all device sizes.

Door lock

Prevents unauthorized access to the process sequences in the chamber.

Calibration certificate & validation

BINDER can significantly reduce the workload in qualifying and validating devices. Nobody knows our devices as well and has as much experience in certifications as we do.

FED 115
Access ports with silicone plugs, 10, 30, 50, 100 mm	O
HEPA fresh-air filter, Class H 14 (according to EN 1822, min. 99.995% for 0.1-0.3 µm particles)	O
Fasteners for additional security for racks (1 set of 4)	O
Anti-slip rubber pads for safe stacking (1 set of 4 pieces)	O
Independent adjustable temperature safety device class 3.1 (DIN 12880) with optical alarm	O
Analog temperature output, 4 - 20 mA with 6-pin DIN socket (output not adjustable)	O
Over temperature alarm, audible, can be switched off. Temperature limit can be set at the independent, adjustable temperature safety device	O
Securing elements for additional fastening of racks (1 set of 4 pieces)	O
Temperature measurement acc. to DIN 12880 at 150 °C or at specified testing temperature with measuring protocol and certificate	O
Factory calibration certificate. Measurement in center of chamber at 150 °C (302 °F) or at specified testing temperature	O
Extension to factory calibration certificate. Each additional measurement at additional measuring point or temperature	O
Data Logger Kit T 350: For continuous temperature recording of 0 °C to 350 °C. Kit includes 1 data logger, PT 100 sensor with 2 m Teflon extension cable and 1 fixture for mounting to the BINDER unit	O
Data Logger Software: Configuration and evaluation software for all BINDER Data Logger Kits, incl. data cable	O
Rack, chrome-plated	O
Rack, stainless steel	O
Shelf, perforated, stainless steel	O
Locking door handle with key	O
Door gasket, FKM (Viton)	O
Inert gas connection (gas inlet and outlet; Ø 10 mm).We also recommend the mostly gas-tight version option	O
Mostly gas-tight version	O
Door with window 320 x 260 mm and interior lighting (15 W)	O
Increased air-exchange rate through high-performance fan	O

BINDER FED 115: High-performance and particularly adaptable heating chamber with mechanical convection

The BINDER FED series