Heating ovens - KEEP IT HOT
Size ranges of FED series

Heating chamber with mechanical convection

The multi-talented BINDER heating chamber of the FED series provides almost unlimited capacity and is particularly adaptable. With advanced timing functions and a digitally controllable fan, this heating chamber easily controls temperature and convection conditions.


Advantages:

  • Fast, even tempering
  • Wide temperature range
  • Quality "Made in Germany"
Areas of application:
Electronics / Semiconductor Industry
Electronics / Semiconductor Industry
Basic Research / Research Institutes
Basic Research / Research Institutes
Plastics Industry
Plastics Industry
Features Customer benefits Characteristics
APT.line™
  • Quick drying
  • Identical test conditions throughout the chamber interior
  • Independent of specimen size and quantity

APT.line™ for maximum precision

  • Uniform circulation even under full load
  • Homogeneous temperature conditions throughout specimen material
Temperature range
  • Broad range of applications
  • Short warm up times

Standard up to 300 °C

  • Large power reserves
Inner chamber concept
  • Maximum occupational safety
  • Easy loading and unloading of specimen material
  • Easy cleaning

Inner chamber made of stainless steel

  • Very tight door closure with 2-point door latch
  • Low heat dissipation due to 60 mm insulation
  • Rack with tilt protection
  • No permanent fixtures
Standard equipment
  • Reliable, easy handling

Comprehensive standards

  • Microprocessor control
  • Ergonomically positioned controller.
  • RS 422 interface
  • PT 100 temperature sensor
Quality
  • Reliable devices with long service lives
  • Short delivery times
  • Minimal maintenance and operating costs

Premium quality

  • Highly automated
  • Series production
  • High-quality materials, state-of-the-art production technology
  • High standard according to DIN 12880 (27-point measurement)
Accessories and Services
  • Flexible solution in terms of size, type and equipment
  • Optimal solution for numerous applications
  • BINDER INDIVIDUAL for customer-specific solutions
  • Worldwide BINDER Service

Comprehensive product portfolio

  • Size 53 to 720 liters
  • Additional product lines with humidity, light, CO2 or vacuum
  • Voltage variants (UL) and certificates
  • Various options: Door with viewing window, access ports, reinforced shelves, Data Logger Kits
  • Worldwide service network
  • Electronically controlled APT.line™ preheating chamber assuring temperature accuracy and reproducible results
  • Temperature range from 5 °C above ambient temperature to 300 °C
  • MS controller with several timer functions
  • Controller timer functions: delayed ON, delayed OFF, temperature dependent delayed OFF
  • Digital temperature setting with an accuracy of one degree
  • Adjustable fan speed
  • Front ventilation flap slide and rear exhaust duct Ø 50 mm (1.97 inch)
  • Independent adjustable temperature safety device class 2 (DIN 12880), with visual temperature alarm
  • RS 422 interface for use with APT-COM™ DataControlSystem communication software or switch over to printer output with RS 232 / RS 422 interface converter
  • Units up to 115 liters are stackable
  • 2 chrome-plated racks included
  • BINDER test confirmation
FED 115
Exterior dimensions
Housing
Width (mm) 835
Height (incl. feet/castors) (mm) 705
Depth (plus connections and fittings) (mm) 645
Depth (incl. connections and fittings) (mm) 760
Wall clearance, rear (mm) 100
Wall clearance, side (mm) 160
Exhaust duct (outer Ø mm) 52
Steam space volume (l) 158
Number of doors (ea.) 1
     
Interior dimensions
Width (mm) 600
Height (mm) 480
Depth (mm) 400
Interior volume (l) 115
Racks (number standard/max.) 2 / 6
Load per rack (kg) 20
Permitted total load (kg) 50
Weight (empty) (kg) 62
     
Temperature data
Temperature range approx. 5 °C above ambient temperature to (°C) 300
Temperature variation
at 70 °C (± K) 0,7
at 150 °C (± K) 1,8
at 300 °C (± K) 3,9
Temperature fluctuation (± K) 0,3
Warm-up time 1)
to 70 °C (min.) 7
to 150 °C (min.) 30
to 250 °C (min.) 49
Recovery time after doors were open for 30 sec. 1)
at 70 °C (min.) 2
at 150 °C (min.) 8
at 300 °C (min.) 15
     
Ventilation data
Ventilation
at 70 °C (x/h) 29
at 150 °C (x/h) 32
at 300 °C (x/h) 26
     
Electrical data
IP protection class acc. to EN 60529 IP 20
Voltage (± 10%) 50 / 60 Hz (V) 230
Nominal power (kW) 1,6
Energy consumption
at 70 °C (W) 230
at 150 °C (W) 544
at 300 °C (W) 1100

1) To 98% of the set value

All technical data are specified for units with standard equipment at an ambient temperature of 25 °C and a line voltage fluctuation of ±10%. The temperature data is determined in accordance to factory standard following DIN 12880, respecting the recommended wall clearances of 10% of the height, width and depth of the inner chamber. All data was determined at 100% of fan speed. All figures are typical average values for series devices. We reserve the right to alter technical specifications at any time.

Numerous access ports

Numerous access ports

With silicone plugs for introducing external measuring instruments into the chamber, access ports with 10, 30, 50, 100 mm diameters.

Door with window and interior lighting

Door with window and interior lighting

For optimal process control in the inner chamber, available for all device sizes.

Door lock

Door lock

Prevents unauthorized access to the process sequences in the chamber.

Calibration certificate & validation

Calibration certificate & validation

BINDER can significantly reduce the workload in qualifying and validating devices. Nobody knows our devices as well and has as much experience in certifications as we do.

FED 115
Access ports with silicone plugs, 10, 30, 50, 100 mm O
HEPA fresh-air filter, Class H 14 (according to EN 1822, min. 99.995% for 0.1-0.3 µm particles) O
Fasteners for additional security for racks (1 set of 4) O
Anti-slip rubber pads for safe stacking (1 set of 4 pieces) O
Independent adjustable temperature safety device class 3.1 (DIN 12880) with optical alarm O
Analog temperature output, 4 - 20 mA with 6-pin DIN socket (output not adjustable) O
Over temperature alarm, audible, can be switched off. Temperature limit can be set at the independent, adjustable temperature safety device O
Securing elements for additional fastening of racks (1 set of 4 pieces) O
Temperature measurement acc. to DIN 12880 at 150 °C or at specified testing temperature with measuring protocol and certificate O
Factory calibration certificate. Measurement in center of chamber at 150 °C (302 °F) or at specified testing temperature O
Extension to factory calibration certificate. Each additional measurement at additional measuring point or temperature O
Data Logger Kit T 350: For continuous temperature recording of 0 °C to 350 °C. Kit includes 1 data logger, PT 100 sensor with 2 m Teflon extension cable and 1 fixture for mounting to the BINDER unit O
Data Logger Software: Configuration and evaluation software for all BINDER Data Logger Kits, incl. data cable O
Rack, chrome-plated O
Rack, stainless steel O
Shelf, perforated, stainless steel O
Locking door handle with key O
Door gasket, FKM (Viton) O
Inert gas connection (gas inlet and outlet; Ø 10 mm).We also recommend the mostly gas-tight version option O
Mostly gas-tight version O
Door with window 320 x 260 mm and interior lighting (15 W) O
Increased air-exchange rate through high-performance fan O


Contact

Are you interested in further information on products and services?

Contact us
Technical support

Do you have a technical problem and need assistance in trouble-shooting?

Use our service form.

Request technical service
Newsletter subscription
Webspecials
  • KEEP IT HOT with BINDER Oven
    KEEP IT HOT with BINDER Oven
    and choose from 3 coupons or
    get a 5€ Amazon gift card www.binder-oven.com
Product inquiry FED 115

Interested in


Your details


Data storage and data sharing


Please fill in all required fields

(*) Required fields