Heating ovens - KEEP IT HOT
Size ranges of ED series

Heating oven with mechanical control

The strength of the BINDER ED series heating oven: routine drying and sterilization applications up to 300 °C. Thanks to the gravity convection, thermal processes are highly efficient for this heating oven. A BINDER ED heating oven ensures fast, uniform drying.


Advantages:

  • Fast, even tempering
  • Wide temperature range
  • Quality "Made in Germany"
Areas of application:
Biotechnology
Biotechnology
Basic Research / Research Institutes
Basic Research / Research Institutes
Human / Veterinary Medicine
Human / Veterinary Medicine
Features Customer benefits Characteristics
APT.line™
  • Quick drying
  • Identical test conditions throughout the chamber interior
  • Independent of specimen size and quantity

APT.line™ for maximum precision

  • Uniform circulation even under full load
  • Homogeneous temperature conditions throughout specimen material
Temperature range
  • Broad range of applications
  • Short warm up times

Standard up to 300 °C

  • Large power reserves
Inner chamber concept
  • Maximum occupational safety
  • Easy loading and unloading of specimen material
  • Easy cleaning

Inner chamber made of stainless steel

  • Very tight door closure with 2-point door latch
  • Low heat dissipation due to 60 mm insulation
  • Rack with tilt protection
  • No permanent fixtures
Standard equipment
  • Reliable, easy handling

Comprehensive standards

  • Microprocessor control
  • Ergonomically positioned controller.
  • RS 422 interface
  • PT 100 temperature sensor
Quality
  • Reliable devices with long service lives
  • Short delivery times
  • Minimal maintenance and operating costs

Premium quality

  • Highly automated
  • Series production
  • High-quality materials, state-of-the-art production technology
  • High standard according to DIN 12880 (27-point measurement)
Accessories and Services
  • Flexible solution in terms of size, type and equipment
  • Optimal solution for numerous applications
  • BINDER INDIVIDUAL for customer-specific solutions
  • Worldwide BINDER Service

Comprehensive product portfolio

  • Size 23 to 720 liters
  • Additional product lines with humidity, light, CO2 or vacuum
  • Voltage variants (UL) and certificates
  • Various options: Door with viewing window, access ports, reinforced shelves, Data Logger Kits
  • Worldwide service network
  • Electronically controlled APT.line™ preheating chamber assuring temperature accuracy and reproducible results
  • Temperature range from 5 °C (9 °F) above ambient temperature to 300 °C (527 °F)
  • Digital temperature setting with an accuracy of one degree
  • DS control with integrated timer 0 to 99,59 hrs
  • Independent adjustable temperature safety device class 2 (DIN 12880), with visual temperature alarm
  • Adjustable ventilation by means of front ventilation flap slide and rear exhaust Ø 50 mm
  • Optional RS 422 Interface for APT-COM™ Data Control System communication software
  • Units up to 115 liters are stackable
  • 2 chrome-plated racks included
  • BINDER test confirmation
ED 400
Exterior dimensions
Width (mm) 1235
Height (incl. feet) (mm) 1025
Depth (mm) 765
Plus door handle and connection (mm) 105
Wall clearance, rear (mm) 100
Wall clearance, side (mm) 160
Exhaust duct (outer Ø mm) 52
Steam space volume (l) 457
Number of doors (ea.) 2
     
Interior dimensions
Width (mm) 1000
Height (mm) 800
Depth (mm) 520
Interior volume (l) 400
Racks (number standard/max.) 2 / 10
Load per rack (kg) 35
Permitted total load (kg) 90
Weight (empty) (kg) 125
     
Temperature data
Temperature range approx. 5 °C above ambient temperature to (°C) 300
Temperature variation 1)
at 70 °C (± K) 1,7
at 150 °C (± K) 3
at 300 °C (± K) 5,0
Temperature fluctuation at 70 °C (± K) 0,3
Warm-up time 2)
to 70 °C (min.) 49
to 150 °C (min.) 62
to 250 °C (min.) 74
Recovery time after doors were open for 30 sec. 2)
at 70 °C (min.) 4
at 150 °C (min.) 20
at 300 °C (min.) 24
     
Ventilation data
Ventilation
at 70 °C (x/h) 11
at 150 °C (x/h) 10
at 300 °C (x/h) 9
     
Electrical data
IP protection class acc. to EN 60529 IP 20
Voltage (± 10%) 50 / 60 Hz (V), 3~ 400
Nominal power (kW) 3,4
Energy consumption
at 70 °C (W) 201
at 150 °C (W) 672
at 300 °C (W) 1000

1) without a viewing window

2) To 98% of the set value

 

All technical data are specified for units with standard equipment at an ambient temperature of +25 °C and a line voltage fluctuation of ±10%. The temperature data is determined in accordance to factory standard following DIN 12880, respecting the recommended wall clearances of 10% of the height, width and depth of the inner chamber. All figures are typical average values for series devices. We reserve the right to alter technical specifications at any time.

Numerous access ports

Numerous access ports

With silicone plugs for introducing external measuring instruments into the chamber, access ports with 10, 30, 50, 100 mm diameters.

Door with window and interior lighting

Door with window and interior lighting

For optimal process control in the inner chamber, available for all device sizes.

Door lock

Door lock

Prevents unauthorized access to the process sequences in the chamber.

Calibration certificate & validation

Calibration certificate & validation

BINDER can significantly reduce the workload in qualifying and validating devices. Nobody knows our devices as well and has as much experience in certifications as we do.

ED 400
Access ports with silicone plug, 10, 30, 50, 100 mm O
Anti-slip rubber pads for safe stacking (1 set of 4 pieces) O
Switchable audible alarm for over temperature. Adjustable limit on the independent temperature safety device O
Independent temperature safety device class 3.1 (DIN 12880) with optical alarm O
Analog output for temperature 4 - 20 mA with 6-pin DIN socket (output not adjustable) O
Temperature measurement acc. to DIN 12880 (27 measuring points, for 23 liter devices 15 measuring points) at 150 °C or at specified temperature with measuring protocol and certificate O
Calibration certificate, measurement in center of chamber at 150 °C or at specified testing temperature O
Extension to calibration certificate. Each additional measurement at additional measuring point or testing temperature O
Data Logger Kit T 350: For continuous temperature recording of 0 °C to 350 °C. Kit includes 1 data logger, PT 100 sensor with 2 m Teflon extension cable and 1 fixture for mounting to the BINDER unit O
Data Logger Software: Configuration and evaluation software for all BINDER Data Logger Kits, incl. data cable O
Rack, chrome-plated O
Rack, stainless steel O
Perforated shelf, stainless steel O
Door lock O
Door gasket, FKM (Viton) O
2 doors each with window 470 x 290 mm and interior lighting (30 W) O


Contact

Are you interested in further information on products and services?

Contact us
Technical support

Do you have a technical problem and need assistance in trouble-shooting?

Use our service form.

Request technical service
Newsletter subscription
Webspecials
  • KEEP IT HOT with BINDER Oven
    KEEP IT HOT with BINDER Oven
    and choose from 3 coupons or
    get a 5€ Amazon gift card www.binder-oven.com
Product inquiry ED 400

Interested in


Your details


Data storage and data sharing


Please fill in all required fields

(*) Required fields